



Audi A5 (2020–2024) telefoonhouder
We werken aan een oplossing, maar op dit moment is één lader niet genoeg voor de iPhone Duo. Voorlopig raden we de aankoop voor dit model daarom af.
Gratis verzending vanaf CHF 150
Details die het verschil maken
Kijk naar de zwarte rubberstrip.
Er zijn veel telefoonhouders. Niemand anders gebruikt hem.
- Stil. Het rubber dempt trillingen, dus de houder rammelt en maakt geen geluid tijdens het rijden.
- Blijft zitten. Het rubber is dikker dan de sleuf, dus de houder trek je er moeilijk uit, zelfs zonder plakband.
- Geen krassen. Geen plastic dat over plastic schuurt, dus je interieur blijft zoals het uit de fabriek kwam.
Typische hobbymatige 3D-geprinte houders hebben hem niet.
Kogelgewricht
Gekartelde grip
Kantel de telefoon binnen het bereik in de hoek die jij wilt.
De gekartelde moer geeft meer grip bij het aandraaien om de stand vast te zetten.
Vertrouwd door de branche


Audi A5 Phone Mount (2020–2024)
Made for the A5 centre console. Sits in the storage tray in front of the gear selector, low and clear of the screen. Qi2.2 charger included. No drilling. No adhesive.
Check your console first
This mount needs the storage tray with the hinged cover in front of the gear selector. The console photo on this page shows it (Audi Q5 40 TDI Black Edition).
Some Audi A5 consoles have an open tray, no cover, or a different cover. On those the mount does not fit. Not sure? Send us a photo of your console before ordering.
At a glance
Use it for
Phone at hand next to the gear selector, charging over Qi2.2 up to 25 W. Tilt the charger to set the angle.
Keep a tray
The front of the mount is an open tray. Keys, coins, a card. The storage space is not lost.
What it fits
Audi A5, 2020–2024, only with the storage tray and hinged cover in front of the gear selector. Left-hand drive. Open tray or a different cover: does not fit.
Shipping
Leaves our Swiss workshop every Tuesday and Friday. Free shipping from CHF 150, £150, €250 or $299.
Scanned from the car. Shaped to the tray.
The base is modelled on a 3D scan of the lidded console tray the A5 shares with the A4 and Q5. It fills the storage tray in front of the gear selector, so there are no suction cups, no adhesive pads and no screws. Lift it out and the console is back to factory.
Drop it in. Plug it in. Drive.
Open the tray cover and set the mount in the storage tray. Plug the charger into a USB-C port. Snap the phone on. The photos and the install video on this page were shot in an Audi Q5. The tray is the same.
Fitment. Read this before ordering.
Fits
Does not fit
Built for the A5
Made for one console
Shaped to the lidded storage tray of the A5. No universal clamp, no wobble.
No drilling, no adhesive
Reversible. The interior stays untouched for resale or lease return.
Magnetic Qi2 alignment
The phone stays put on cobbles, gravel and speed bumps. You pull it off. It does not fall off.
Low, out of the way
Below the climate controls, clear of the screen and the vents.
Designed and made in Switzerland
Sintered nylon, manufactured in-house. 2-year warranty in every country. Every part replaceable at fair prices.
Specifications
FAQ
How do I know my A5 has the right tray?
Look in front of the gear selector. A storage tray with a hinged black cover, as in the console photo on this page: it fits. An open tray with no cover, or a different cover: it does not.
Do I lose the storage tray?
Not all of it. The front of the mount is an open tray for keys, coins or a card.
Which charger do I get?
A MagSafe-compatible Qi2.2 wireless charger, up to 25 W over USB-C. Works with iPhone 12 and newer, and any phone in a MagSafe-compatible case.
Does it fit the A5 Coupé, Cabriolet or S5?
Send us a photo of your centre console. If the tray and cover match the console photo on this page, it fits.
How fast does it ship, and is shipping free?
Orders leave our Swiss facility every Tuesday and Friday. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.
Pairs well with
MagSafe® and iPhone® are trademarks of Apple Inc. Audi® and A5® are trademarks of AUDI AG. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by Apple or Audi.
Het begint met een 3D-scan van uw auto.
Daarna uren en uren modelleerwerk. Daarna nylonpoeder, laag voor laag samengesmolten door een laser, tot het poeder de vorm van uw console heeft.
Het rubber is waar het om draait.
Deze houder is ontworpen met rubber eromheen. Dat rubber zet de houder vast — en zorgt ervoor dat het interieur nergens beschadigt. Niets krast. Niets drukt zich in leer of Alcantara.
Daarom gaat hij er in seconden in en weer uit. Geen tape om los te trekken, geen restanten. Geen zuignap die het in de hitte begeeft. Geen gereedschap, geen schroeven, niets dat in dashboardkunststof wordt gedreven dat daar nooit voor bedoeld was.
Wij steken er de uren in, zodat de montage seconden duurt.
Scannen, modelleren, printen, afwerken en monteren gebeuren in één gebouw in Ticino, Zwitserland. Niets komt afgewerkt binnen. Niets wordt van een ander label voorzien. Als een onderdeel moet veranderen, verandert het diezelfde week.
swiss made
het origineel