



Audi A5 (2020–2024) telefonhållare
Vi arbetar på en lösning, men just nu räcker inte en enda laddare för iPhone Duo. Tills vidare avråder vi därför från köp för den modellen.
Fri frakt från CHF 150
Detaljer som gör skillnad
Titta på den svarta gummilisten.
Det finns många telefonhållare. Ingen annan använder den.
- Tyst. Gummit dämpar vibrationer, så hållaren skramlar inte och låter inte under körning.
- Sitter kvar. Gummit är tjockare än springan, så hållaren är svår att dra ut, även utan tejp.
- Inga repor. Ingen plast som skaver mot plast, så din interiör förblir som när den lämnade fabriken.
Vanliga hobbyhållare från 3D-skrivare har den inte.
Kulled
Räfflat grepp
Luta telefonen inom räckvidden till den vinkel du vill.
Den räfflade muttern ger bättre grepp när du drar åt och låser läget.
Branschens förtroende


Audi A5 Phone Mount (2020–2024)
Made for the A5 centre console. Sits in the storage tray in front of the gear selector, low and clear of the screen. Qi2.2 charger included. No drilling. No adhesive.
Check your console first
This mount needs the storage tray with the hinged cover in front of the gear selector. The console photo on this page shows it (Audi Q5 40 TDI Black Edition).
Some Audi A5 consoles have an open tray, no cover, or a different cover. On those the mount does not fit. Not sure? Send us a photo of your console before ordering.
At a glance
Use it for
Phone at hand next to the gear selector, charging over Qi2.2 up to 25 W. Tilt the charger to set the angle.
Keep a tray
The front of the mount is an open tray. Keys, coins, a card. The storage space is not lost.
What it fits
Audi A5, 2020–2024, only with the storage tray and hinged cover in front of the gear selector. Left-hand drive. Open tray or a different cover: does not fit.
Shipping
Leaves our Swiss workshop every Tuesday and Friday. Free shipping from CHF 150, £150, €250 or $299.
Scanned from the car. Shaped to the tray.
The base is modelled on a 3D scan of the lidded console tray the A5 shares with the A4 and Q5. It fills the storage tray in front of the gear selector, so there are no suction cups, no adhesive pads and no screws. Lift it out and the console is back to factory.
Drop it in. Plug it in. Drive.
Open the tray cover and set the mount in the storage tray. Plug the charger into a USB-C port. Snap the phone on. The photos and the install video on this page were shot in an Audi Q5. The tray is the same.
Fitment. Read this before ordering.
Fits
Does not fit
Built for the A5
Made for one console
Shaped to the lidded storage tray of the A5. No universal clamp, no wobble.
No drilling, no adhesive
Reversible. The interior stays untouched for resale or lease return.
Magnetic Qi2 alignment
The phone stays put on cobbles, gravel and speed bumps. You pull it off. It does not fall off.
Low, out of the way
Below the climate controls, clear of the screen and the vents.
Designed and made in Switzerland
Sintered nylon, manufactured in-house. 2-year warranty in every country. Every part replaceable at fair prices.
Specifications
FAQ
How do I know my A5 has the right tray?
Look in front of the gear selector. A storage tray with a hinged black cover, as in the console photo on this page: it fits. An open tray with no cover, or a different cover: it does not.
Do I lose the storage tray?
Not all of it. The front of the mount is an open tray for keys, coins or a card.
Which charger do I get?
A MagSafe-compatible Qi2.2 wireless charger, up to 25 W over USB-C. Works with iPhone 12 and newer, and any phone in a MagSafe-compatible case.
Does it fit the A5 Coupé, Cabriolet or S5?
Send us a photo of your centre console. If the tray and cover match the console photo on this page, it fits.
How fast does it ship, and is shipping free?
Orders leave our Swiss facility every Tuesday and Friday. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.
Pairs well with
MagSafe® and iPhone® are trademarks of Apple Inc. Audi® and A5® are trademarks of AUDI AG. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by Apple or Audi.
Det börjar med en 3D-skanning av din bil.
Sedan timmar av modellering. Sedan nylonpulver, som en laser smälter samman lager för lager tills pulvret har formen av din mittkonsol.
Gummit är hela poängen.
Den här hållaren är konstruerad med gummi runt om. Det gummit låser hållaren på plats — och gör att den aldrig lämnar märken i inredningen. Inget repar. Inget trycker sig in i läder eller Alcantara.
Det är också därför den sitter på plats och lossnar på några sekunder. Ingen tejp att dra loss, inga rester. Ingen sugkopp som ger vika i värmen. Inga verktyg, inga skruvar, inget som borras in i instrumentpanelens plast som aldrig var gjord för det.
Vi lägger timmarna så att monteringen tar sekunder.
Skanning, modellering, utskrift, efterbearbetning och montering sker i en och samma byggnad i Ticino, Schweiz. Ingenting kommer färdigt. Ingenting etiketteras om. När en detalj behöver ändras ändras den samma vecka.
swiss made
originalet