



Audi A5 (2020–2024) Handyhalterung
Wir arbeiten an einer Lösung, aber derzeit reicht ein einzelnes Ladegerät für das iPhone Duo nicht aus. Vorerst raten wir Ihnen daher vom Kauf für dieses Modell ab.
Kostenloser Versand ab CHF 150
Details, die den Unterschied machen
Achten Sie auf den schwarzen Gummistreifen.
Es gibt viele Handyhalterungen. Niemand sonst verwendet ihn.
- Leise. Der Gummi dämpft Vibrationen, so klappert und rauscht die Halterung während der Fahrt nicht.
- Sitzt fest. Der Gummi ist dicker als der Schlitz, deshalb lässt sich die Halterung kaum herausziehen, auch ohne Klebeband.
- Keine Kratzer. Kein Kunststoff reibt auf Kunststoff, so bleibt Ihr Innenraum wie ab Werk.
Typische 3D-gedruckte Hobby-Halterungen haben ihn nicht.
Kugelgelenk
Gerändelter Griff
Neigen Sie das Handy innerhalb des Bereichs in den Winkel, der Ihnen passt.
Die gerändelte Mutter greift beim Festziehen besser und fixiert die Position.
Vertrauen der Branche


Audi A5 Phone Mount (2020–2024)
Made for the A5 centre console. Sits in the storage tray in front of the gear selector, low and clear of the screen. Qi2.2 charger included. No drilling. No adhesive.
Check your console first
This mount needs the storage tray with the hinged cover in front of the gear selector. The console photo on this page shows it (Audi Q5 40 TDI Black Edition).
Some Audi A5 consoles have an open tray, no cover, or a different cover. On those the mount does not fit. Not sure? Send us a photo of your console before ordering.
At a glance
Use it for
Phone at hand next to the gear selector, charging over Qi2.2 up to 25 W. Tilt the charger to set the angle.
Keep a tray
The front of the mount is an open tray. Keys, coins, a card. The storage space is not lost.
What it fits
Audi A5, 2020–2024, only with the storage tray and hinged cover in front of the gear selector. Left-hand drive. Open tray or a different cover: does not fit.
Shipping
Leaves our Swiss workshop every Tuesday and Friday. Free shipping from CHF 150, £150, €250 or $299.
Scanned from the car. Shaped to the tray.
The base is modelled on a 3D scan of the lidded console tray the A5 shares with the A4 and Q5. It fills the storage tray in front of the gear selector, so there are no suction cups, no adhesive pads and no screws. Lift it out and the console is back to factory.
Drop it in. Plug it in. Drive.
Open the tray cover and set the mount in the storage tray. Plug the charger into a USB-C port. Snap the phone on. The photos and the install video on this page were shot in an Audi Q5. The tray is the same.
Fitment. Read this before ordering.
Fits
Does not fit
Built for the A5
Made for one console
Shaped to the lidded storage tray of the A5. No universal clamp, no wobble.
No drilling, no adhesive
Reversible. The interior stays untouched for resale or lease return.
Magnetic Qi2 alignment
The phone stays put on cobbles, gravel and speed bumps. You pull it off. It does not fall off.
Low, out of the way
Below the climate controls, clear of the screen and the vents.
Designed and made in Switzerland
Sintered nylon, manufactured in-house. 2-year warranty in every country. Every part replaceable at fair prices.
Specifications
FAQ
How do I know my A5 has the right tray?
Look in front of the gear selector. A storage tray with a hinged black cover, as in the console photo on this page: it fits. An open tray with no cover, or a different cover: it does not.
Do I lose the storage tray?
Not all of it. The front of the mount is an open tray for keys, coins or a card.
Which charger do I get?
A MagSafe-compatible Qi2.2 wireless charger, up to 25 W over USB-C. Works with iPhone 12 and newer, and any phone in a MagSafe-compatible case.
Does it fit the A5 Coupé, Cabriolet or S5?
Send us a photo of your centre console. If the tray and cover match the console photo on this page, it fits.
How fast does it ship, and is shipping free?
Orders leave our Swiss facility every Tuesday and Friday. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.
Pairs well with
MagSafe® and iPhone® are trademarks of Apple Inc. Audi® and A5® are trademarks of AUDI AG. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by Apple or Audi.
Am Anfang steht ein 3D-Scan Ihres Autos.
Dann stundenlange Modellierarbeit. Dann Nylonpulver, das ein Laser Schicht für Schicht verschmilzt, bis das Pulver die Form Ihrer Mittelkonsole hat.
Der Gummi ist der entscheidende Punkt.
Diese Halterung ist mit einer Gummiumrandung konstruiert. Dieser Gummi hält sie an Ort und Stelle — und sorgt dafür, dass sie im Innenraum keine Spuren hinterlässt. Nichts verkratzt. Nichts drückt sich in Leder oder Alcantara.
Deshalb ist sie in Sekunden eingesetzt und wieder heraus. Kein Klebeband zum Abziehen, keine Rückstände. Kein Saugnapf, der in der Hitze nachgibt. Kein Werkzeug, keine Schrauben, nichts, was in Armaturenbrett-Kunststoffe getrieben wird, die dafür nie gemacht waren.
Wir investieren die Stunden, damit die Montage Sekunden dauert.
Scannen, Modellieren, Drucken, Nacharbeiten und Montieren geschehen in einem Gebäude im Tessin, Schweiz. Nichts kommt fertig an. Nichts wird umetikettiert. Wenn ein Teil geändert werden muss, wird es in derselben Woche geändert.
swiss made
das original