



Soporte de móvil Audi A4 (2020–2024)
Estamos trabajando en una solución, pero por ahora un solo cargador no es suficiente para el iPhone Duo. De momento, no recomendamos comprarlo para este modelo.
Envío gratis desde CHF 150
Detalles que marcan la diferencia
Fíjate en la tira de goma negra.
Hay muchos soportes de teléfono. Nadie más la usa.
- Silencioso. La goma absorbe las vibraciones, así que el soporte no añade traqueteos ni ruidos mientras conduces.
- No se mueve. La goma es más gruesa que la ranura, así que el soporte cuesta de sacar, incluso sin cinta adhesiva.
- Sin arañazos. Nada de plástico rozando plástico, así que tu interior se queda como salió de fábrica.
Los típicos soportes caseros impresos en 3D no la tienen.
Rótula
Agarre moleteado
Inclina el móvil dentro de su rango, al ángulo que prefieras.
La tuerca moleteada agarra mejor al apretarla para fijar la posición.
La confianza del sector


Audi A4 Phone Mount (2020–2024)
Made for the A4 centre console. Sits in the storage tray in front of the gear selector, low and clear of the screen. Qi2.2 charger included. No drilling. No adhesive.
Check your console first
This mount needs the storage tray with the hinged cover in front of the gear selector. The console photo on this page shows it (Audi Q5 40 TDI Black Edition).
Some Audi A4 consoles have an open tray, no cover, or a different cover. On those the mount does not fit. Not sure? Send us a photo of your console before ordering.
At a glance
Use it for
Phone at hand next to the gear selector, charging over Qi2.2 up to 25 W. Tilt the charger to set the angle.
Keep a tray
The front of the mount is an open tray. Keys, coins, a card. The storage space is not lost.
What it fits
Audi A4, 2020–2024, only with the storage tray and hinged cover in front of the gear selector. Left-hand drive. Open tray or a different cover: does not fit.
Shipping
Leaves our Swiss workshop every Tuesday and Friday. Free shipping from CHF 150, £150, €250 or $299.
Scanned from the car. Shaped to the tray.
The base is modelled on a 3D scan of the lidded console tray the A4 shares with the A5 and Q5. It fills the storage tray in front of the gear selector, so there are no suction cups, no adhesive pads and no screws. Lift it out and the console is back to factory.
Drop it in. Plug it in. Drive.
Open the tray cover and set the mount in the storage tray. Plug the charger into a USB-C port. Snap the phone on. The photos and the install video on this page were shot in an Audi Q5. The tray is the same.
Fitment. Read this before ordering.
Fits
Does not fit
Built for the A4
Made for one console
Shaped to the lidded storage tray of the A4. No universal clamp, no wobble.
No drilling, no adhesive
Reversible. The interior stays untouched for resale or lease return.
Magnetic Qi2 alignment
The phone stays put on cobbles, gravel and speed bumps. You pull it off. It does not fall off.
Low, out of the way
Below the climate controls, clear of the screen and the vents.
Designed and made in Switzerland
Sintered nylon, manufactured in-house. 2-year warranty in every country. Every part replaceable at fair prices.
Specifications
FAQ
How do I know my A4 has the right tray?
Look in front of the gear selector. A storage tray with a hinged black cover, as in the console photo on this page: it fits. An open tray with no cover, or a different cover: it does not.
Do I lose the storage tray?
Not all of it. The front of the mount is an open tray for keys, coins or a card.
Which charger do I get?
A MagSafe-compatible Qi2.2 wireless charger, up to 25 W over USB-C. Works with iPhone 12 and newer, and any phone in a MagSafe-compatible case.
Does it fit the A4 Avant, allroad or S4?
Send us a photo of your centre console. If the tray and cover match the console photo on this page, it fits.
How fast does it ship, and is shipping free?
Orders leave our Swiss facility every Tuesday and Friday. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.
Pairs well with
MagSafe® and iPhone® are trademarks of Apple Inc. Audi® and A4® are trademarks of AUDI AG. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by Apple or Audi.
Empieza con un escaneo 3D de tu coche.
Después, horas y horas de modelado. Después, polvo de nailon, fundido por un láser capa a capa, hasta que el polvo tiene la forma de tu consola.
El caucho es lo que importa.
Este soporte está diseñado con caucho alrededor. Ese caucho es lo que lo fija en su sitio — y lo que evita cualquier marca en el interior. No raya. No deja huella en la piel ni en el Alcantara.
También es la razón por la que entra y sale en segundos. Sin cinta que despegar ni residuos. Sin ventosa que ceda con el calor. Sin herramientas, sin tornillos, sin nada clavado en los plásticos del salpicadero, que nunca se pensaron para eso.
Ponemos las horas para que la instalación dure segundos.
Escaneo, modelado, impresión, acabado y montaje ocurren en un mismo edificio en Tesino, Suiza. Nada llega terminado. Nada se reetiqueta. Cuando una pieza tiene que cambiar, cambia esa misma semana.
swiss made
el original