Under Cabinet Molle Panel for Hymer GCS

Sure, the hook in the Hymer Grand Canyon S toilet is a practical idea for drying one towel, but what if you want to use the toilet at night and prefer not to turn on the light to avoid waking up your partner?

We created this panel with custom hooks specifically to solve this problem.

Is this panel compatible with other vehicles? Sure, it can, but check the measurements before ordering:

920 mm x 175 mm is the rectangle size of the panel, and it need 4 screws next to the corners and one in the center of the rectangle.

• It makes use of one of the warmest and most ventilated areas in the beloved Grand Canyon S to dry your clothes using the air vent positioned underneath. This is especially practical during autumn and winter, after time spent outdoors.

• This panel is designed to be as unobtrusive as possible within the interior design of the van.

• The LED light remains fully accessible, and the five screws required for installation (5x 8 mm holes need to be drilled) are easy to install and blend in with the cabinet without being visually obtrusive.

• In addition to the rectangular holes in the panel to support the hooks, we also included 10 mm holes so you can attach larger items, such as with an elastic rope, for added versatility.

• Swiss Designed and Made, sourcing local materials.

You will receive:

• 1x MOLLE panel, made of 4 mm thick aluminum, sourced and machined by us in Switzerland, with a double powder-coated matte black finish.

• 5x Screws for installation. With a drill and a measurement tape, installation takes less than 10 minutes.

• 10x Hooks that can be installed in various positions on the panel, those hooks are made of sintered Nylon.

Installation takes approximately 10 minutes, a drill with a M8 wood bit and a large screw driver.

Press here for installation instructions