VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit
Crafter / MAN TGE MagSafe phone mount install demo by Tactic Engineering (from Instagram)

MAN TGE 2017+ Phone Mount

CHF 99.00

Taxes included. Shipping calculated at checkout.

Both sides?

Want one on both sides? Order both LHD and RHD. LHD fits the left side of the dash (driver on US/EU vans, passenger on UK/AU). RHD fits the right side. 35% off the second one, applied automatically in the cart.

iPhone DuoNot recommended for now

We're working on a solution, but right now a single charger isn't enough for the iPhone Duo. For the moment, we don't recommend buying this mount for that model.

Adding to Cart Added to Cart
In stock.Ships within 4 working days. First ordered, first shipped.

Free shipping from CHF 150

★ 4.9 · 285 store reviewsShips from 🇨🇭 SwitzerlandSwiss VAT included2-year warranty

Details that make the difference

Look at the black rubber strip.

There are many phone mounts out there. Nobody else uses it.

  • Quiet. The rubber absorbs vibration, so the mount adds no rattle or noise while you drive.
  • Stays put. The rubber is thicker than the slot, so the mount is hard to pull out, even without adhesive tape.
  • No scratches. No plastic rubbing on plastic, so your interior stays as it left the factory.

Typical hobby 3D-printed mounts do not have it.

Ball joint

Knurled grip

Tilt the phone within its range to the angle you like.

The knurled nut gives more grip when you tighten it to lock the position.

✓Complete your kit

Customers rate us 4.9/5 based on 285 reviews.

Trusted by the industry

Burkhart Engineering Hobus Dutch Van Parts Montpellier 4x4 Van Creed Summit Vans Nirvana Outfitters Ferrigato Auto e Caravan noovoBurkhart Engineering Hobus Dutch Van Parts Montpellier 4x4 Van Creed Summit Vans Nirvana Outfitters Ferrigato Auto e Caravan noovo
Both sides?

Want one on both sides? Order both LHD and RHD. LHD fits the left side of the dash (driver on US/EU vans, passenger on UK/AU). RHD fits the right side. 35% off the second one, applied automatically in the cart.

MAN TGE 2017+ Phone Mount

Phone mount made for the MAN TGE (2017+), LHD and RHD. Slots into the factory position in 60 seconds, no drilling, no adhesive. MagSafe Qi2.2 charger up to 25 W, or a Quad Lock adapter for the gear you already own.

Made in Switzerland LHD & RHD No drilling. No adhesive.

At a glance

Use it for

Keep your phone in view in the MAN TGE, charging over Qi2.2 MagSafe up to 25 W, with a ball joint and knurled grip to set the angle.

What it fits

MAN TGE 2017+, LHD and RHD. Slots into the factory cup holder or ashtray in 60 seconds, no drilling, no adhesive.

Shipping

Leaves our Swiss workshop every Tuesday and Friday. Free shipping from CHF 150, £150, €250 or $299.

One base. Two heads.

Same vehicle-specific base. Two heads so the mount works with the gear you already own.

Qi2 charger included

MagSafe

A complete kit. Mount plus a MagSafe-compatible Qi2 wireless charger. Plug in USB-C, snap your phone on, drive.

Works with
iPhone 12 and newer Apple MagSafe case Peak Design case Quad Lock case
Adapter only

Quad Lock®

A small plastic adapter we designed and manufacture in-house, fitting between our vehicle-specific base and your existing Quad Lock® MAG charger. You bring the Quad Lock® Wireless Charging Head and a Quad Lock® compatible case. Both sold separately by Quad Lock.

Adding a Quad Lock charger?

Fitting the Quad Lock® MAG wireless charging head to the Quad Lock variant takes five minutes. Watch the walkthrough.

Built for your van.

Made for your van

Slots into the factory cup holder or ashtray.

Designed in Switzerland

Engineered and manufactured in-house.

No drilling, no adhesive

Reversible install in 60 seconds.

2-year warranty

Spare parts always available.

Not sure which one? Find your fit.

iPhone 12+ (no case or Apple MagSafe case) MagSafe
Peak Design MagSafe case MagSafe
Quad Lock MagSafe case (no Quad Lock charger yet) MagSafe
Quad Lock MAG case + already own the charger Quad Lock

Fitment.

  • MAN TGE 2017+.
  • LHD (Europe / US) and RHD (UK / JP). Select at checkout.

Warranty.

Two-year warranty. Spare parts always available.

Specifications.

MagSafe variant — TGE base with Qi2 charger
Charger standardQi2.2 wireless, up to 25 W
Power inputUSB-C PD, 30 W or stronger source for full speed
Magnet typeMagnetic Qi2 alignment
Max case thickness3 mm (any MagSafe-compatible case)
Phone compatibilityiPhone 12 and newer with MagSafe. Any Android phone with a MagSafe-compatible case.
Quad Lock® variant — adapter only
Compatible withQuad Lock® MAG Wireless Charging Head
Adapter materialSintered nylon
Mount and install
Install typeSlots into the factory cup holder, ashtray, or mount location
Tools requiredNone. Reversible in 60 seconds.
Mount body materialSintered nylon, vehicle-specific profile
OriginDesigned and manufactured in Switzerland

MagSafe® and iPhone® are trademarks of Apple Inc. Quad Lock® is a trademark of Annex Products Pty Ltd. Peak Design® is a trademark of Peak Design Ltd. RAM Mounts® and X-Grip® are trademarks of National Products Inc. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of the above companies.

Compatibility at a glance

Vehicle or phone Works Notes
MAN TGE 2017+ Yes Slots into the factory cup holder or ashtray.
LHD and RHD Yes Select at checkout.
iPhone 12+, no case or Apple MagSafe case Yes Pick MagSafe.
Peak Design MagSafe case Yes Pick MagSafe.
Quad Lock MagSafe case, no Quad Lock charger yet Yes Pick MagSafe.
Quad Lock MAG case, charger already owned Yes Pick Quad Lock.

Pick the head that fits the gear you already own.

FAQ

Does it fit my TGE?

It fits the MAN TGE 2017+, in LHD and RHD. Select your steering side at checkout.

Is a charger included?

With MagSafe, yes: a Qi2.2 wireless charger, up to 25 W. Use a USB-C PD source of 30 W or more for full speed. Cases up to 3 mm.

I already use Quad Lock. Does it work?

Yes. Our adapter fits between the base and your Quad Lock MAG Wireless Charging Head. The head and a Quad Lock compatible case are sold separately by Quad Lock.

Will it rattle or scratch the interior?

No. The black rubber strip absorbs vibration, so the mount adds no rattle. It is thicker than the slot, so the mount stays put without adhesive tape, and no plastic rubs on plastic.

What about warranty?

Two-year warranty. Spare parts are always available. Designed and manufactured in Switzerland.

Quick questions

Which phones work with the MagSafe head?

iPhone 12 and newer, with an Apple MagSafe, Peak Design or Quad Lock case.

Pairs well with

04 — HOW IT IS MADE

It starts as a 3D scan of your car.

Then hours and hours of modelling. Then nylon powder, fused by a laser one layer at a time, until the powder holds the shape of your console.

Parts coming out of the powder bed. Cleaned and polished in-house.

The rubber is the whole point.

This mount is designed with rubber around it. That rubber is what locks it in place — and what keeps it from ever marking the interior. Nothing scratches. Nothing presses into leather or Alcantara.

It is also why it goes in and comes out in seconds. No tape to peel off and no residue left behind. No suction cup to let go in the heat. No tools, no screws, nothing driven into dashboard plastics that were never made to take it.

We do the hours so the install takes seconds.

Scanning, modelling, printing, finishing and assembly happen in one building in Ticino, Switzerland. Nothing arrives finished. Nothing is rebadged. When a part needs to change, it changes that week.

swiss made

the original

VW Crafter and MAN TGE 2017+ MagSafe phone mount by Tactic Engineering, vehicle-specific dashboard fit

MAN TGE 2017+ Phone Mount

CHF 99.00