White Porsche 911 coupe - Tactic Engineering makes a vehicle-specific MagSafe phone mount for the 911 991 generation centre console
Tactic Engineering MagSafe Qi2 phone mount installed in the open centre console tray of a Porsche 718 with carbon fiber trim and PDK Sport buttons, no drilling
Tactic Engineering magnetic MagSafe phone mount installed in the open centre console tray of a Porsche 911 (991) interior with Alcantara trim, no drilling, no adhesive
White Porsche 911 coupe - Tactic Engineering makes a vehicle-specific MagSafe phone mount for the 911 991 generation centre console
Tactic Engineering MagSafe Qi2 phone mount installed in the open centre console tray of a Porsche 718 with carbon fiber trim and PDK Sport buttons, no drilling
Porsche 911 991 and 718 magnetic phone mount demonstration in the centre console
Installing the Tactic Engineering phone mount in the open console tray of a Porsche 911 991 without Smoker's Package, no tools
Tactic Engineering magnetic MagSafe phone mount installed in the open centre console tray of a Porsche 911 (991) interior with Alcantara trim, no drilling, no adhesive
Porsche 911 (991) phone mount for cars without the smoker's package, by Tactic Engineering, rotating 360°: vehicle-specific SLS nylon base designed and built in Switzerland, with MagSafe-compatible Qi2 wireless charger.

Porsche 911 (991) Phone Mount (No Smoker's Package)

$134.00 USD

Ships from Switzerland. Price as shown. Import VAT / local taxes may be collected by the carrier on delivery — not by us at checkout. Shipping calculated at checkout.

Adding to Cart Added to Cart

Details that make the difference

Look at the black rubber strip.

There are many phone mounts out there. Nobody else uses it.

  • Quiet. The rubber absorbs vibration, so the mount adds no rattle or noise while you drive.
  • Stays put. The rubber is thicker than the slot, so the mount is hard to pull out, even without adhesive tape.
  • No scratches. No plastic rubbing on plastic, so your interior stays as it left the factory.

Typical hobby 3D-printed mounts do not have it.

Ball joint

Knurled grip

Tilt the phone within its range to the angle you like.

The knurled nut gives more grip when you tighten it to lock the position.

Ships in 4–5 working days.More orders than we can build in two. First ordered, first shipped.
★ 4.9 · 280 store reviewsShips from 🇨🇭 SwitzerlandTracked & insured2-year warranty
✓Complete your kit

Trusted by the industry

Burkhart Engineering Hobus Dutch Van Parts Montpellier 4x4 Van Creed Summit Vans Nirvana Outfitters Ferrigato Auto e Caravan noovoBurkhart Engineering Hobus Dutch Van Parts Montpellier 4x4 Van Creed Summit Vans Nirvana Outfitters Ferrigato Auto e Caravan noovo

Porsche 911 (991) Phone Mount
No Smoker’s Package

Built for the standard 991 centre console, without the Smoker’s Package. Drops into the open storage tray in front of the shifter. No drilling. No adhesive. Nothing touches the leather.

Made in Switzerland991.1 & 991.2 · 2012–2019Standard console · no Smoker’s PackageNo drilling. No adhesive.Qi2 charger included (MagSafe)

At a glance

Use it for

Keep your phone in view in the 911, charging over Qi2.2 MagSafe up to 25 W, with a ball joint and knurled grip to set the angle.

What it fits

Porsche 911 991.1 (2012-2016) & 991.2 (2017-2019). Drops into the open storage tray in front of the shifter (no ashtray lid), no drilling, no adhesive.

Shipping

Leaves our Swiss workshop every Tuesday and Friday. Free shipping from CHF 150, £150, €250 or $299.

Which console do you have?

Look in front of the shifter. Two consoles. Two mounts. They are not interchangeable.

✓ This page

Standard console

Open storage tray in front of the shifter. No lid. No ashtray.

✗ Different mount

Smoker’s Package console

Ashtray with a flip-up lid in front of the shifter. This mount does not fit it.

Go to the 911 (991) Smoker’s Package mount →

One base. Two heads.

The base is shaped to the 991’s storage tray and drops straight in. On top, pick the head that matches the gear you already own.

Qi2 charger included

MagSafe

A complete kit. Mount plus a MagSafe-compatible Qi2.2 wireless charger, up to 25 W over USB-C. Snap the phone on, drive. iPhone 12 and newer, any MagSafe-compatible case up to 3 mm.

Adapter only

Quad Lock®

A sintered-nylon adapter between our base and your existing Quad Lock® MAG wireless charging head. You bring the Quad Lock® head and case, both sold separately by Quad Lock.

Fitment. Read this before ordering.

The rule: if your 911 has the open storage tray in front of the shifter — no ashtray lid — this mount fits.

Fits

911 991.1 (2012–2016) — Carrera, S, 4S, GTS, Turbo, GT3 911 991.2 (2017–2019) — Carrera, T, S, 4S, GTS, Turbo, GT3, GT2 RS

Does not fit

911 992 (2020+) — redesigned interior 2012 cars still on the 997 body Smoker’s Package — the ashtray lid replaces the open tray (see the Smoker’s Package mount below)
Smoker’s Package

Ashtray with the flip-up lid in front of the shifter? That console has its own mount: 911 (991) Smoker’s Package Phone Mount.

Driving a 718 or a 981?

The same console family, its own page: 718 Cayman & Boxster (2017+) · Boxster & Cayman 981 (2013–2016).

Built for the car

Fit

Made for the 991 console

Shaped to the factory tray. Drops in, sits flush, looks like it belongs there.

Install

No drilling, no adhesive

Reversible in seconds. The console stays exactly as Porsche built it — relevant at resale.

Hold

Magnetic Qi2 alignment

The phone stays put through hard cornering. You pull it off; it does not fall off.

Origin

Designed and made in Switzerland

Sintered nylon, manufactured in-house. 2-year warranty, spare parts always available.

Specifications

ConsoleStandard 991 console, open tray. Not for the Smoker’s Package.
Charger standardQi2.2 wireless, up to 25 W (MagSafe variant)
Power inputUSB-C PD, 30 W or stronger source for full speed
MagnetMagnetic Qi2 alignment
Max case thickness3 mm (any MagSafe-compatible case)
Phone compatibilityiPhone 12+, any Qi2 Android or MagSafe-compatible case
Quad Lock variantAdapter for Quad Lock® MAG Wireless Charging Head
InstallDrops into the console tray. No tools. Reversible.
MaterialSintered nylon, vehicle-specific profile
OriginDesigned and manufactured in Switzerland

MagSafe® and iPhone® are trademarks of Apple Inc. Quad Lock® is a trademark of Annex Products Pty Ltd. Porsche® and 911® are trademarks of Dr. Ing. h.c. F. Porsche AG. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of the above companies.

Compatibility at a glance

Vehicle or item Fit
911 991.1 (2012-2016), standard console Yes
911 991.2 (2017-2019), standard console Yes
991 with Smoker’s Package (ashtray lid) No, see the Smoker’s Package mount
911 992 (2020+) No

FAQ

Does it fit my 911?

It fits the 991.1 (2012-2016) and 991.2 (2017-2019) with the open storage tray in front of the shifter. It does not fit the Smoker’s Package console with the ashtray lid, or the 992.

Which charger or head do I get?

Two options on the same base: the MagSafe kit with a MagSafe-compatible Qi2.2 wireless charger (up to 25 W over USB-C, iPhone 12 and newer), or a Quad Lock® adapter for your existing Quad Lock® MAG wireless charging head, sold separately by Quad Lock.

Can I adjust the angle of my phone?

Yes. The ball joint lets you tilt the phone within its range to the angle you like, and the knurled nut gives more grip when you tighten it to lock the position.

Will it rattle or scratch my console?

No. A black rubber strip absorbs vibration, holds the base firmly in place without adhesive tape and stops plastic rubbing on plastic, so your interior stays as it left the factory.

How fast does it ship, and is shipping free?

Orders leave our Swiss facility every Tuesday and Friday. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.

Quick questions

Which phones work with the MagSafe head?

iPhone 12 and newer, or any Android phone with a MagSafe-compatible case up to 3 mm.

Pairs well with

04 — HOW IT IS MADE

It starts as a 3D scan of your car.

Then hours and hours of modelling. Then nylon powder, fused by a laser one layer at a time, until the powder holds the shape of your console.

Parts coming out of the powder bed. Cleaned and polished in-house.

The rubber is the whole point.

This mount is designed with rubber around it. That rubber is what locks it in place — and what keeps it from ever marking the interior. Nothing scratches. Nothing presses into leather or Alcantara.

It is also why it goes in and comes out in seconds. No tape to peel off and no residue left behind. No suction cup to let go in the heat. No tools, no screws, nothing driven into dashboard plastics that were never made to take it.

We do the hours so the install takes seconds.

Scanning, modelling, printing, finishing and assembly happen in one building in Ticino, Switzerland. Nothing arrives finished. Nothing is rebadged. When a part needs to change, it changes that week.

swiss made

the original

White Porsche 911 coupe - Tactic Engineering makes a vehicle-specific MagSafe phone mount for the 911 991 generation centre console

Porsche 911 (991) Phone Mount (No Smoker's Package)

$134.00