VW T7 Phone Mount
Buy it with — Carry skis, boards, or kites. Magnetic, no roof rack needed.
Details that make the difference
Ball joint
Knurled grip
Tilt the phone within its range to the angle you like.
The knurled nut gives more grip when you tighten it to lock the position.
Trusted by the industry
VW T7 Phone Mount
Phone mount for the VW T7 Multivan, LHD and RHD. Replaces the blank cover panel next to the screen, click-fit in 30 seconds. MagSafe Qi2 charger, Quad Lock adapter or 1-inch RAM ball.
At a glance
Use it for
Keep your phone in view in the VW T7, charging over Qi2 MagSafe up to 15 W, with a ball joint and knurled grip to set the angle.
What it fits
VW T7 Multivan, LHD and RHD. Replaces the blank cover panel next to the screen, click-fit in 30 seconds, no tools. That slot must be blank, as on cars without air suspension or other optional controls there.
Shipping
Leaves our Swiss workshop within 48 working hours. Free shipping from CHF 150, £150, €250 or $299.
Pick your mount head.
Same vehicle-specific base. Three heads so the mount works with the gear you already own.
MagSafe
A complete kit. Mount plus a MagSafe-compatible Qi2 wireless charger. Plug in USB-C, snap your phone on, drive.
Quad Lock®
A small plastic adapter we designed and manufacture in-house, fitting between our vehicle-specific base and your existing Quad Lock® MAG charger. You bring the Quad Lock® Wireless Charging Head and a Quad Lock® compatible case. Both sold separately by Quad Lock.
1-inch Ball
Phone mount finished with a 1-inch ball in sintered nylon, fused directly to the mount body. Compatible with any RAM Mounts® arm or third-party 1-inch ball socket. You bring the RAM Mounts® arm and X-Grip® (or any phone cradle), sold separately by RAM Mounts.
Adding a Quad Lock charger?
Fitting the Quad Lock® MAG wireless charging head to the Quad Lock variant takes five minutes. Watch the walkthrough.
Built for your T7.
Made for your T7
Replaces the blank plastic cover panel. Click-fit into the factory button slot.
Designed in Switzerland
Engineered and manufactured in-house.
No drilling, no adhesive
Reversible install in 60 seconds.
2-year warranty
Spare parts always available.
How it works.
Your T7 dashboard has a blank plastic cover panel next to the infotainment screen. If you don't have air suspension or other optional controls, that slot is just a placeholder.
Remove the plastic cover. It pulls straight out. Click our mount into the same slot. The included Qi2 charger snaps into the mount. Route the USB-C cable behind the dash trim.
Your phone magnetically attaches right next to the screen. Perfect viewing angle, always charged, always secure. It stays put over potholes, speed bumps, and mountain passes.
Installation takes 30 seconds. No tools required.
Not sure which one? Find your fit.
| iPhone 12+ (no case or Apple MagSafe case) | MagSafe |
| Peak Design MagSafe case | MagSafe |
| Quad Lock MagSafe case (no Quad Lock charger yet) | MagSafe |
| Quad Lock MAG case + already own the charger | Quad Lock |
| Already own a RAM Mounts arm + cradle | 1-inch Ball |
Fitment.
- VW T7 Multivan. Models without optional buttons in the dash panel slot (e.g. air suspension controls).
- LHD and RHD. Select at checkout.
Warranty.
Two-year warranty. Spare parts always available.
Specifications.
MagSafe® and iPhone® are trademarks of Apple Inc. Quad Lock® is a trademark of Annex Products Pty Ltd. Peak Design® is a trademark of Peak Design Ltd. RAM Mounts® and X-Grip® are trademarks of National Products Inc. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of the above companies.
Compatibility at a glance
| Vehicle or phone | Works | Notes |
|---|---|---|
| VW T7 Multivan, blank cover panel next to the screen | Yes | Click-fit into the factory button slot. |
| T7 with optional buttons in that slot (e.g. air suspension) | No | The slot is already in use. |
| LHD and RHD | Yes | Select at checkout. |
| iPhone 12+, no case or Apple MagSafe case | Yes | Pick MagSafe. |
| Peak Design MagSafe case | Yes | Pick MagSafe. |
| Quad Lock MAG case, charger already owned | Yes | Pick Quad Lock. |
| RAM Mounts arm and cradle already owned | Yes | Pick 1-inch Ball. |
Check the panel next to your infotainment screen: blank cover, this mount fits.
FAQ
Does it fit my T7?
It fits the VW T7 Multivan without optional buttons in the dash panel slot, such as air suspension controls. LHD and RHD.
How does it install?
Pull the blank plastic cover straight out and click the mount into the same slot. Route the USB-C cable behind the dash trim. 30 seconds, no tools, reversible.
Is a charger included?
With MagSafe, yes: a Qi2 wireless charger, up to 15 W. Use a USB-C PD source of 30 W or more for full speed. Cases up to 3 mm.
Which heads are available?
MagSafe with Qi2 charger, a Quad Lock adapter for your Quad Lock MAG head, or a 1-inch ball (RAM Size B) for any RAM Mounts arm.
What about warranty?
Two-year warranty. Spare parts are always available. Designed and manufactured in Switzerland.
Quick questions
Which phones work with the MagSafe head?
iPhone 12 and newer, or any Android phone with a MagSafe-compatible case up to 3 mm.
Pairs well with
It starts as a 3D scan of your car.
Then hours and hours of modelling. Then nylon powder, fused by a laser one layer at a time, until the powder holds the shape of your console.
We do the hours so the install takes seconds.
Scanning, modelling, printing, finishing and assembly happen in one building in Ticino, Switzerland. Nothing arrives finished. Nothing is rebadged. When a part needs to change, it changes that week.
swiss made
the original
