iPhone on the Tactic Engineering MagSafe mount in the Audi Q5 console, by the gear selector
Fitment check: Audi console with the storage tray and hinged cover in front of the gear selector (Audi Q5 40 TDI Black Edition). The mount needs this tray and cover.
Audi Q5 phone mount in the console storage tray, Qi2 charger on a nylon stand
Audi Q5 centre console from above with the phone mount installed
iPhone on the Tactic Engineering MagSafe mount in the Audi Q5 console, by the gear selector
Fitment check: Audi console with the storage tray and hinged cover in front of the gear selector (Audi Q5 40 TDI Black Edition). The mount needs this tray and cover.
Installing the Tactic Engineering phone mount in an Audi Q5 (2021-2024): tray cover open, base set in the storage tray in front of the gear selector, iPhone on the Qi2 MagSafe charger
Audi Q5 phone mount in the console storage tray, Qi2 charger on a nylon stand
Audi Q5 centre console from above with the phone mount installed

Audi A4 (2020–2024) telefonhållare

CHF 119.00

Inklusive moms. Frakt beräknas i kassan.

Mount Type
iPhone Duo

Vi arbetar på en lösning, men just nu räcker inte en enda laddare för iPhone Duo. Tills vidare avråder vi därför från köp för den modellen.

Lägger i varukorgen Tillagd i varukorgen
I lager.Skickas inom 4 arbetsdagar. Först beställd, först skickad.

Fri frakt från CHF 150

★ 4.9 · 283 butiksrecensionerSkickas från 🇨🇭 SchweizSchweizisk moms ingår2 års garanti

Detaljer som gör skillnad

Titta på den svarta gummilisten.

Det finns många telefonhållare. Ingen annan använder den.

  • Tyst. Gummit dämpar vibrationer, så hållaren skramlar inte och låter inte under körning.
  • Sitter kvar. Gummit är tjockare än springan, så hållaren är svår att dra ut, även utan tejp.
  • Inga repor. Ingen plast som skaver mot plast, så din interiör förblir som när den lämnade fabriken.

Vanliga hobbyhållare från 3D-skrivare har den inte.

Kulled

Räfflat grepp

Luta telefonen inom räckvidden till den vinkel du vill.

Den räfflade muttern ger bättre grepp när du drar åt och låser läget.

✓Komplettera ditt kit

Branschens förtroende

Burkhart Engineering Hobus Dutch Van Parts Montpellier 4x4 Van Creed Summit Vans Nirvana Outfitters Ferrigato Auto e Caravan noovoBurkhart Engineering Hobus Dutch Van Parts Montpellier 4x4 Van Creed Summit Vans Nirvana Outfitters Ferrigato Auto e Caravan noovo

Audi A4 Phone Mount (2020–2024)

Made for the A4 centre console. Sits in the storage tray in front of the gear selector, low and clear of the screen. Qi2.2 charger included. No drilling. No adhesive.

Made in SwitzerlandAudi A4, 2020–2024Left-hand driveQi2.2 charger included (MagSafe)Tray with hinged cover required

Check your console first

This mount needs the storage tray with the hinged cover in front of the gear selector. The console photo on this page shows it (Audi Q5 40 TDI Black Edition).

Some Audi A4 consoles have an open tray, no cover, or a different cover. On those the mount does not fit. Not sure? Send us a photo of your console before ordering.

At a glance

Use it for

Phone at hand next to the gear selector, charging over Qi2.2 up to 25 W. Tilt the charger to set the angle.

Keep a tray

The front of the mount is an open tray. Keys, coins, a card. The storage space is not lost.

What it fits

Audi A4, 2020–2024, only with the storage tray and hinged cover in front of the gear selector. Left-hand drive. Open tray or a different cover: does not fit.

Shipping

Leaves our Swiss workshop every Tuesday and Friday. Free shipping from CHF 150, £150, €250 or $299.

Scanned from the car. Shaped to the tray.

The base is modelled on a 3D scan of the lidded console tray the A4 shares with the A5 and Q5. It fills the storage tray in front of the gear selector, so there are no suction cups, no adhesive pads and no screws. Lift it out and the console is back to factory.

Drop it in. Plug it in. Drive.

Open the tray cover and set the mount in the storage tray. Plug the charger into a USB-C port. Snap the phone on. The photos and the install video on this page were shot in an Audi Q5. The tray is the same.

Fitment. Read this before ordering.

Fits

Audi A4, 2020–2024, with the storage tray and hinged cover in front of the gear selectorSame mount as the Audi A5 and Q5 with this tray

Does not fit

Open tray without cover, or a different coverAudi A4 before 2020. Not tested.Audi A5 2025+ (replaces the A4, new generation)Right-hand drive. Not available yet.

Built for the A4

Fit

Made for one console

Shaped to the lidded storage tray of the A4. No universal clamp, no wobble.

Install

No drilling, no adhesive

Reversible. The interior stays untouched for resale or lease return.

Hold

Magnetic Qi2 alignment

The phone stays put on cobbles, gravel and speed bumps. You pull it off. It does not fall off.

View

Low, out of the way

Below the climate controls, clear of the screen and the vents.

Origin

Designed and made in Switzerland

Sintered nylon, manufactured in-house. 2-year warranty in every country. Every part replaceable at fair prices.

Specifications

VehicleAudi A4, 2020–2024. Left-hand drive.
Console requiredStorage tray with hinged cover in front of the gear selector
PositionStorage tray in front of the gear selector
InstallSits in the factory tray. No drilling, no adhesive. Reversible.
Charger standardQi2.2 wireless, up to 25 W
Power inputUSB-C
Max case thickness3 mm (any MagSafe-compatible case)
Phone compatibilityiPhone 12+, any Qi2 Android or MagSafe-compatible case
MaterialSintered nylon, vehicle-specific profile
OriginDesigned and manufactured in Switzerland

FAQ

How do I know my A4 has the right tray?

Look in front of the gear selector. A storage tray with a hinged black cover, as in the console photo on this page: it fits. An open tray with no cover, or a different cover: it does not.

Do I lose the storage tray?

Not all of it. The front of the mount is an open tray for keys, coins or a card.

Which charger do I get?

A MagSafe-compatible Qi2.2 wireless charger, up to 25 W over USB-C. Works with iPhone 12 and newer, and any phone in a MagSafe-compatible case.

Does it fit the A4 Avant, allroad or S4?

Send us a photo of your centre console. If the tray and cover match the console photo on this page, it fits.

How fast does it ship, and is shipping free?

Orders leave our Swiss facility every Tuesday and Friday. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.

Pairs well with

MagSafe® and iPhone® are trademarks of Apple Inc. Audi® and A4® are trademarks of AUDI AG. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by Apple or Audi.

04 — SÅ TILLVERKAS DEN

Det börjar med en 3D-skanning av din bil.

Sedan timmar av modellering. Sedan nylonpulver, som en laser smälter samman lager för lager tills pulvret har formen av din mittkonsol.

Delarna kommer ur pulverbädden. Rengörs och poleras i egen regi.

Gummit är hela poängen.

Den här hållaren är konstruerad med gummi runt om. Det gummit låser hållaren på plats — och gör att den aldrig lämnar märken i inredningen. Inget repar. Inget trycker sig in i läder eller Alcantara.

Det är också därför den sitter på plats och lossnar på några sekunder. Ingen tejp att dra loss, inga rester. Ingen sugkopp som ger vika i värmen. Inga verktyg, inga skruvar, inget som borras in i instrumentpanelens plast som aldrig var gjord för det.

Vi lägger timmarna så att monteringen tar sekunder.

Skanning, modellering, utskrift, efterbearbetning och montering sker i en och samma byggnad i Ticino, Schweiz. Ingenting kommer färdigt. Ingenting etiketteras om. När en detalj behöver ändras ändras den samma vecka.

swiss made

originalet

iPhone on the Tactic Engineering MagSafe mount in the Audi Q5 console, by the gear selector

Audi A4 (2020–2024) telefonhållare

CHF 119.00