Cupra Leon 2020–2023 Phone Mount
Szczegóły, które robią różnicę
Spójrz na czarny gumowy pasek.
Uchwytów na telefon jest wiele. Nikt inny go nie stosuje.
- Cichy. Guma tłumi drgania, więc uchwyt nie stuka i nie hałasuje podczas jazdy.
- Trzyma się mocno. Guma jest grubsza niż szczelina, więc uchwyt trudno wyciągnąć, nawet bez taśmy klejącej.
- Bez rys. Plastik nie ociera o plastik, więc wnętrze pozostaje takie jak z fabryki.
Typowe amatorskie uchwyty z drukarki 3D go nie mają.
Przegub kulowy
Radełkowany chwyt
Odchyl telefon w zakresie regulacji pod kątem, który ci pasuje.
Radełkowana nakrętka daje lepszy chwyt przy dokręcaniu i blokuje pozycję.
Zaufanie branży
Cupra Leon 2020–2023 Phone Mount
Phone mount for the Cupra Leon 2020-2023, LHD and RHD. Push-fits into the console slot beside the gear selector. MagSafe Qi2 charger or Quad Lock adapter.
At a glance
Use it for
Keep your phone in view in the Leon, charging over Qi2 MagSafe up to 15 W, with a ball joint and knurled grip to set the angle.
What it fits
Cupra Leon 2020-2023 (pre-facelift), LHD and RHD. Push-fits into the console slot beside the gear selector. 2024+ facelift? See Cupra Leon 2024+ Phone Mount.
Shipping
Leaves our Swiss workshop within 48 working hours. Free shipping from CHF 150, £150, €250 or $299.
One base. Two heads.
Same vehicle-specific base. Two heads so the mount works with the gear you already own.
MagSafe
A complete kit. Mount plus a MagSafe-compatible Qi2 wireless charger. Plug in USB-C, snap your phone on, drive.
Quad Lock®
A small plastic adapter we designed and manufacture in-house, fitting between our vehicle-specific base and your existing Quad Lock® MAG charger. You bring the Quad Lock® Wireless Charging Head and a Quad Lock® compatible case. Both sold separately by Quad Lock.
Adding a Quad Lock charger?
Fitting the Quad Lock® MAG wireless charging head to the Quad Lock variant takes five minutes. Watch the walkthrough.
Built for your Leon.
Made for your Leon
The base fits directly into the console slot beside the gear selector. Push it in and drive.
Designed in Switzerland
Engineered and manufactured in-house.
No drilling, no adhesive
No clips. No suction cups. No adhesive. No drilling.
2-year warranty
Spare parts always available.
How it works.
The base push-fits into the storage slot beside your Leon's gear selector. Friction holds it. No scratches. No rattles.
The included Qi2 charger snaps into the head. Your phone attaches magnetically and sits at eye line next to the shifter. It stays put.
One console slot becomes your phone's permanent home.
Not sure which one? Find your fit.
| iPhone 12+ (no case or Apple MagSafe case) | MagSafe |
| Peak Design MagSafe case | MagSafe |
| Quad Lock MagSafe case (no Quad Lock charger yet) | MagSafe |
| Quad Lock MAG case + already own the charger | Quad Lock |
Fitment.
Designed for the Cupra Leon, pre-facelift.
- Model years: 2020, 2021, 2022, 2023.
- Left-hand drive and right-hand drive. Select your driving side above.
Not compatible: the 2024 Leon facelift has a revised centre console. For 2024+, see the Cupra Leon 2024+ Phone Mount.
Warranty.
Two-year warranty in Switzerland and the EU. Every part replaceable at fair prices.
Specifications.
MagSafe® and iPhone® are trademarks of Apple Inc. Quad Lock® is a trademark of Annex Products Pty Ltd. Peak Design® is a trademark of Peak Design Ltd. CUPRA® is a trademark of SEAT S.A. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of the above companies.
Compatibility at a glance
| Vehicle or phone | Works | Notes |
|---|---|---|
| Cupra Leon 2020-2023 (pre-facelift) | Yes | Select your driving side. |
| Cupra Leon 2024 facelift | No | Revised centre console. See the 2024+ mount. |
| iPhone 12+, no case or Apple MagSafe case | Yes | Pick MagSafe. |
| Peak Design MagSafe case | Yes | Pick MagSafe. |
| Quad Lock MAG case, charger already owned | Yes | Pick Quad Lock. |
FAQ
Does it fit my Leon?
Yes, if it is a Cupra Leon from model years 2020 to 2023, before the 2024 facelift. For 2024+, use the Cupra Leon 2024+ Phone Mount.
Where does it sit?
It push-fits into the storage slot beside the gear selector. Your phone sits at eye line next to the shifter.
Is a charger included?
With MagSafe, yes: a Qi2 wireless charger, up to 15 W. Use a USB-C PD source of 30 W or more for full speed. Cases up to 3 mm.
Will it rattle or scratch the interior?
No. TPU contact surfaces and a friction fit prevent scratches and rattles. The base was designed from a 3D scan of the console at 0.1 mm accuracy.
I already use Quad Lock. Does it work?
Yes. Our adapter fits between the base and your Quad Lock MAG Wireless Charging Head. The head and a Quad Lock compatible case are sold separately by Quad Lock.
How fast does it ship, and is shipping free?
Orders leave our Swiss facility within 48 working hours. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.
Pairs well with
Zaczyna się od skanu 3D Twojego samochodu.
Potem godziny modelowania. Potem proszek nylonowy, spajany laserem warstwa po warstwie, aż przyjmie kształt Twojej konsoli.
Guma to sedno sprawy.
Ten uchwyt zaprojektowano z gumą dookoła. To ta guma blokuje go w miejscu — i sprawia, że nic we wnętrzu nie zostaje uszkodzone. Nic nie rysuje. Nic nie odciska się w skórze ani alcantarze.
Dlatego montaż i demontaż zajmują sekundy. Żadnej taśmy do odklejania, żadnych resztek. Żadnej przyssawki, która puszcza w upale. Żadnych narzędzi, żadnych wkrętów, niczego wbijanego w plastik deski rozdzielczej, który nigdy nie był do tego przeznaczony.
Godziny bierzemy na siebie, żeby montaż trwał sekundy.
Skanowanie, modelowanie, druk, wykończenie i montaż odbywają się w jednym budynku w Ticino w Szwajcarii. Nic nie przyjeżdża gotowe. Nic nie jest przebrandowane. Kiedy część wymaga zmiany, zmienia się w tym samym tygodniu.
swiss made
oryginał
