



Audi A5 Phone Mount (2020–2024)
We're working on a solution, but right now a single charger isn't enough for the iPhone Duo. For the moment, we don't recommend buying this mount for that model.
Free shipping from CHF 150
Details that make the difference
Look at the black rubber strip.
There are many phone mounts out there. Nobody else uses it.
- Quiet. The rubber absorbs vibration, so the mount adds no rattle or noise while you drive.
- Stays put. The rubber is thicker than the slot, so the mount is hard to pull out, even without adhesive tape.
- No scratches. No plastic rubbing on plastic, so your interior stays as it left the factory.
Typical hobby 3D-printed mounts do not have it.
Ball joint
Knurled grip
Tilt the phone within its range to the angle you like.
The knurled nut gives more grip when you tighten it to lock the position.
Trusted by the industry


Audi A5 Phone Mount (2020–2024)
Made for the A5 centre console. Sits in the storage tray in front of the gear selector, low and clear of the screen. Qi2.2 charger included. No drilling. No adhesive.
Check your console first
This mount needs the storage tray with the hinged cover in front of the gear selector. The console photo on this page shows it (Audi Q5 40 TDI Black Edition).
Some Audi A5 consoles have an open tray, no cover, or a different cover. On those the mount does not fit. Not sure? Send us a photo of your console before ordering.
At a glance
Use it for
Phone at hand next to the gear selector, charging over Qi2.2 up to 25 W. Tilt the charger to set the angle.
Keep a tray
The front of the mount is an open tray. Keys, coins, a card. The storage space is not lost.
What it fits
Audi A5, 2020–2024, only with the storage tray and hinged cover in front of the gear selector. Left-hand drive. Open tray or a different cover: does not fit.
Shipping
Leaves our Swiss workshop every Tuesday and Friday. Free shipping from CHF 150, £150, €250 or $299.
Scanned from the car. Shaped to the tray.
The base is modelled on a 3D scan of the lidded console tray the A5 shares with the A4 and Q5. It fills the storage tray in front of the gear selector, so there are no suction cups, no adhesive pads and no screws. Lift it out and the console is back to factory.
Drop it in. Plug it in. Drive.
Open the tray cover and set the mount in the storage tray. Plug the charger into a USB-C port. Snap the phone on. The photos and the install video on this page were shot in an Audi Q5. The tray is the same.
Fitment. Read this before ordering.
Fits
Does not fit
Built for the A5
Made for one console
Shaped to the lidded storage tray of the A5. No universal clamp, no wobble.
No drilling, no adhesive
Reversible. The interior stays untouched for resale or lease return.
Magnetic Qi2 alignment
The phone stays put on cobbles, gravel and speed bumps. You pull it off. It does not fall off.
Low, out of the way
Below the climate controls, clear of the screen and the vents.
Designed and made in Switzerland
Sintered nylon, manufactured in-house. 2-year warranty in every country. Every part replaceable at fair prices.
Specifications
FAQ
How do I know my A5 has the right tray?
Look in front of the gear selector. A storage tray with a hinged black cover, as in the console photo on this page: it fits. An open tray with no cover, or a different cover: it does not.
Do I lose the storage tray?
Not all of it. The front of the mount is an open tray for keys, coins or a card.
Which charger do I get?
A MagSafe-compatible Qi2.2 wireless charger, up to 25 W over USB-C. Works with iPhone 12 and newer, and any phone in a MagSafe-compatible case.
Does it fit the A5 Coupé, Cabriolet or S5?
Send us a photo of your centre console. If the tray and cover match the console photo on this page, it fits.
How fast does it ship, and is shipping free?
Orders leave our Swiss facility every Tuesday and Friday. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.
Pairs well with
MagSafe® and iPhone® are trademarks of Apple Inc. Audi® and A5® are trademarks of AUDI AG. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by Apple or Audi.
It starts as a 3D scan of your car.
Then hours and hours of modelling. Then nylon powder, fused by a laser one layer at a time, until the powder holds the shape of your console.
The rubber is the whole point.
This mount is designed with rubber around it. That rubber is what locks it in place — and what keeps it from ever marking the interior. Nothing scratches. Nothing presses into leather or Alcantara.
It is also why it goes in and comes out in seconds. No tape to peel off and no residue left behind. No suction cup to let go in the heat. No tools, no screws, nothing driven into dashboard plastics that were never made to take it.
We do the hours so the install takes seconds.
Scanning, modelling, printing, finishing and assembly happen in one building in Ticino, Switzerland. Nothing arrives finished. Nothing is rebadged. When a part needs to change, it changes that week.
swiss made
the original