Cupra Formentor 2020–2023 Phone Mount
Details that make the difference
Look at the black rubber strip.
There are many phone mounts out there. Nobody else uses it.
- Quiet. The rubber absorbs vibration, so the mount adds no rattle or noise while you drive.
- Stays put. The rubber is thicker than the slot, so the mount is hard to pull out, even without adhesive tape.
- No scratches. No plastic rubbing on plastic, so your interior stays as it left the factory.
Typical hobby 3D-printed mounts do not have it.
Ball joint
Knurled grip
Tilt the phone within its range to the angle you like.
The knurled nut gives more grip when you tighten it to lock the position.
Trusted by the industry
Cupra Formentor Phone Mount
Phone mount for the Cupra Formentor 2020-2023, all engines and trims, LHD and RHD. Push-fits into the console slot beside the gear selector. MagSafe Qi2 charger or Quad Lock adapter.
At a glance
Use it for
Keep your phone in view in the Formentor, charging over Qi2 MagSafe up to 15 W, with a ball joint and knurled grip to set the angle.
What it fits
Cupra Formentor 2020-2023 (pre-facelift), all engines and trims, LHD and RHD. Push-fits into the console slot beside the gear selector. 2024+ facelift? See Cupra Formentor 2024+ Phone Mount.
Shipping
Leaves our Swiss workshop within 48 working hours. Free shipping from CHF 150, £150, €250 or $279.
One base. Two heads.
Same vehicle-specific base. Two heads so the mount works with the gear you already own.
MagSafe
A complete kit. Mount plus a MagSafe-compatible Qi2 wireless charger. Plug in USB-C, snap your phone on, drive.
Quad Lock®
A small plastic adapter we designed and manufacture in-house, fitting between our vehicle-specific base and your existing Quad Lock® MAG charger. You bring the Quad Lock® Wireless Charging Head and a Quad Lock® compatible case. Both sold separately by Quad Lock.
Adding a Quad Lock charger?
Fitting the Quad Lock® MAG wireless charging head to the Quad Lock variant takes five minutes. Watch the walkthrough.
Built for your Formentor.
Made for your Formentor
The base fits directly into the console slot beside the gear selector. Push it in and drive.
Designed in Switzerland
Engineered and manufactured in-house.
No drilling, no adhesive
No clips. No suction cups. No adhesive. No drilling.
2-year warranty
Spare parts always available.
How it works.
The base push-fits into the storage slot beside your Formentor's gear selector. Friction holds it. Preventing scratches, eliminating rattles, keeping everything secure.
The included Qi2 charger snaps into the head. Your phone magnetically attaches, sitting at eye line next to the shifter. It stays put.
One console slot becomes your phone's permanent home.
Not sure which one? Find your fit.
| iPhone 12+ (no case or Apple MagSafe case) | MagSafe |
| Peak Design MagSafe case | MagSafe |
| Quad Lock MagSafe case (no Quad Lock charger yet) | MagSafe |
| Quad Lock MAG case + already own the charger | Quad Lock |
Fitment.
Designed for the Cupra Formentor, first generation pre-facelift. The console geometry is identical across the range.
- Model years: 2020, 2021, 2022, 2023.
- All engines and trims: 1.5 TSI, 2.0 TSI, 2.0 TDI, e-Hybrid, VZ, VZ5.
- Left-hand drive and right-hand drive. Select your driving side above.
Not compatible: the 2024 Formentor facelift revised the centre console, so this mount covers pre-facelift cars only. For the 2024+ facelift, see the Cupra Formentor 2024+ Phone Mount. The pre-facelift Cupra Leon, Seat Leon and Ateca (2020-2023) use different console geometries. This mount is designed exclusively for the Formentor 2020–2023.
Shipping.
This item is in stock and ships now.
Warranty.
Two-year warranty. Spare parts always available.
Specifications.
MagSafe® and iPhone® are trademarks of Apple Inc. Quad Lock® is a trademark of Annex Products Pty Ltd. Peak Design® is a trademark of Peak Design Ltd. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of the above companies.
Compatibility at a glance
| Vehicle or phone | Works | Notes |
|---|---|---|
| Cupra Formentor 2020-2023 (pre-facelift) | Yes | All engines and trims: 1.5 TSI, 2.0 TSI, 2.0 TDI, e-Hybrid, VZ, VZ5. |
| Formentor 2024 facelift | No | Revised centre console. |
| Cupra Leon, Seat Leon, Ateca | No | Different console geometry. |
| LHD and RHD | Yes | Select your driving side. |
| iPhone 12+, no case or Apple MagSafe case | Yes | Pick MagSafe. |
| Peak Design MagSafe case | Yes | Pick MagSafe. |
| Quad Lock MAG case, charger already owned | Yes | Pick Quad Lock. |
Pre-facelift cars only. The 2024 Formentor facelift has a different console.
FAQ
Does it fit my Formentor?
Yes, if it is a first-generation pre-facelift car, model years 2020 to 2023. The console geometry is identical across the range.
Where does it sit?
It push-fits into the storage slot beside the gear selector. Your phone sits at eye line next to the shifter.
Is a charger included?
With MagSafe, yes: a Qi2 wireless charger, up to 15 W. Use a USB-C PD source of 30 W or more for full speed. Cases up to 3 mm.
Will it rattle or scratch the interior?
No. TPU contact surfaces and a friction fit prevent scratches and eliminate rattles. The base was designed from a 3D scan of the console at 0.1 mm accuracy.
I already use Quad Lock. Does it work?
Yes. Our adapter fits between the base and your Quad Lock MAG Wireless Charging Head. The head and a Quad Lock compatible case are sold separately by Quad Lock.
Quick questions
Which phones work with the MagSafe head?
iPhone 12 and newer, or any Android phone with a MagSafe-compatible case up to 3 mm.
Pairs well with
It starts as a 3D scan of your car.
Then hours and hours of modelling. Then nylon powder, fused by a laser one layer at a time, until the powder holds the shape of your console.
The rubber is the whole point.
This mount is designed with rubber around it. That rubber is what locks it in place — and what keeps it from ever marking the interior. Nothing scratches. Nothing presses into leather or Alcantara.
It is also why it goes in and comes out in seconds. No tape to peel off and no residue left behind. No suction cup to let go in the heat. No tools, no screws, nothing driven into dashboard plastics that were never made to take it.
We do the hours so the install takes seconds.
Scanning, modelling, printing, finishing and assembly happen in one building in Ticino, Switzerland. Nothing arrives finished. Nothing is rebadged. When a part needs to change, it changes that week.
swiss made
the original
Cupra Formentor 2020–2023 Phone Mount
RHD (UK / Japan) / MagSafe-compatible (charger included)