Mercedes Sprinter 2019–2026 Phone Mount
SPRINTER MAGSAFE HOLDER
Swiss precision. Industrial materials. Zero compromises.
THE PROBLEM
Your Sprinter's interior is designed for professional use. Then you stick a suction cup mount on the windscreen or clip some generic holder to the air vent.
We built something better.
THE SOLUTION
60 grams of industrial-grade sintered nylon. One dash pocket mount that belongs in your Sprinter.
No suction cups. No adhesive. No drilling. No tools. Just push it into the pocket next to your screen and drive.
Includes McDodo Qi2 MagSafe charger. Everything you need in one box.
HOW IT WORKS
The holder slots directly into the pocket next to your Sprinter's screen. The edges create a friction lock – preventing scratches, eliminating rattles, keeping everything secure.
The included McDodo Qi2 charger snaps into the mount. Your phone magnetically attaches. You can tilt it to your preferred viewing angle. It stays put.
Installation takes 5 seconds. No tools required.
THE MATERIALS
Sintered Nylon (60g): Industrial SLS 3D printing. Not desktop filament printing. This material survives heat, UV, impacts, commercial vehicle vibration. It doesn't warp. It doesn't crack. It doesn't fade.
Made in Switzerland. Designed for drivers who spend all day in the cab.
SPECIFICATIONS
Mount
Included charger — McDodo MagQ Qi2
PHONE COMPATIBILITY
The included Qi2 charger works with all MagSafe iPhones and Qi2-compatible Android devices.
Apple MagSafe — Compatible iPhones
- iPhone 17 / 17 Air / 17 Pro / 17 Pro Max
- iPhone 16 / 16 Plus / 16 Pro / 16 Pro Max
- iPhone 15 / 15 Plus / 15 Pro / 15 Pro Max
- iPhone 14 / 14 Plus / 14 Pro / 14 Pro Max
- iPhone 13 / 13 mini / 13 Pro / 13 Pro Max
- iPhone 12 / 12 mini / 12 Pro / 12 Pro Max
Qi2 — Compatible Android Devices
- Google Pixel 10 / 10 Pro / 10 Pro XL (native Qi2)
- Samsung Galaxy S25 / S25+ / S25 Ultra (Qi2 Ready — magnetic case required)
- Samsung Galaxy S26 series (native Qi2 expected)
- HMD Skyline (native Qi2)
This list is growing. As more manufacturers adopt Qi2, more phones will be compatible. "Qi2 Ready" phones require a magnetic case for proper alignment.
WHY CHARGER INCLUDED?
Simple: convenience.
We include the McDodo Qi2 MagSafe charger because we've tested it extensively with this mount. The dimensions work. The fit is secure. You get everything you need in one box.
No hunting for compatible chargers. No guesswork. Install and drive.
BUILT FOR COMMERCIAL USE
Sprinters work hard. Your phone mount should too.
Industrial SLS nylon survives the vibration, temperature extremes, and daily abuse of commercial driving. We've tested it in delivery vans, mobile workshops, and long-haul operations.
This isn't a consumer product adapted for commercial use. It's designed from scratch for vehicles that work.
WHY THIS EXISTS
Most Sprinter phone mounts are either:
- Suction cup mounts that fall off in summer heat
- Adhesive mounts that damage your dash
- Cheap 3D prints that crack from vibration
We use a $50,000 industrial SLS printer. We source proper materials. We manufacture in Switzerland.
And we charge what it actually costs to make something that lasts.
IN THE BOX
- 1× Sprinter Dash Pocket Mount
- 1× McDodo Qi2 MagSafe Charger (USB-C, 100 cm cable)
- Installation instructions (hint: just push it in)
COMPATIBILITY
Mercedes Sprinter 2019-2026
Works with both left-hand and right-hand drive models
Fits the dash pocket next to the central screen
Pick your mount head
Same vehicle-specific base. Three head options so the mount works with the ecosystem you already own.
MagSafe-compatible (charger included)
A complete kit. Mount + MagSafe-compatible wireless charging puck. Plug in USB-C, snap your phone on, drive.
Works with: iPhone® 12 and newer, Apple MagSafe® cases, Peak Design® MagSafe-compatible cases (stronger magnetic hold), Quad Lock® MagSafe-compatible cases (stronger magnetic hold).
QuadLock-compatible adapter
A small plastic adapter we designed and manufacture in-house, fitting between our vehicle-specific base and your existing Quad Lock® MAG charger.
You bring: the Quad Lock® Wireless Charging Head and a Quad Lock® compatible case. Both sold separately by Quad Lock.
20-second walkthrough: how the adapter clicks into the mount.
1-inch Ball (RAM compatible)
Phone mount finished with a 1-inch ball in sintered nylon, fused directly to the mount body. Compatible with any RAM Mounts® arm or third-party 1-inch ball socket.
You bring: the RAM Mounts® arm and X-Grip® (or any phone cradle), sold separately by RAM Mounts.
Which variant matches your phone setup?
Quick lookup: based on what you already own, here is which variant to pick.
| What you already own | Pick this variant |
|---|---|
| iPhone 12 or newer (no case or Apple MagSafe case) | MagSafe-compatible (charger included) |
| Peak Design MagSafe-compatible case | MagSafe-compatible (charger included) — stronger hold |
| Quad Lock MagSafe-compatible case, no Quad Lock charger yet | MagSafe-compatible (charger included) — stronger hold |
| Quad Lock MAG case + you already own the Quad Lock charger | QuadLock-compatible adapter |
| RAM Mounts arm + cradle (already own a RAM ecosystem) | 1-inch Ball (RAM compatible) |
MagSafe® and iPhone® are trademarks of Apple Inc. Quad Lock® is a trademark of Annex Products Pty Ltd. Peak Design® is a trademark of Peak Design Ltd. RAM Mounts® and X-Grip® are trademarks of National Products Inc. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by Apple Inc., Annex Products Pty Ltd, Peak Design Ltd., or National Products Inc.
swiss
made