Porsche Cayenne 2024+ Phone Mount
Details that make the difference
Look at the black rubber strip.
There are many phone mounts out there. Nobody else uses it.
- Quiet. The rubber absorbs vibration, so the mount adds no rattle or noise while you drive.
- Stays put. The rubber is thicker than the slot, so the mount is hard to pull out, even without adhesive tape.
- No scratches. No plastic rubbing on plastic, so your interior stays as it left the factory.
Typical hobby 3D-printed mounts do not have it.
Ball joint
Knurled grip
Tilt the phone within its range to the angle you like.
The knurled nut gives more grip when you tighten it to lock the position.
Trusted by the industry
Porsche Cayenne Phone Mount
Vehicle-specific magnetic phone mount for the Cayenne 2024+ facelift. Pick the head that fits the gear you already own.
At a glance
Use it for
Keep your phone at eye line next to the shifter, charging over Qi2 MagSafe up to 15 W, with a ball joint and knurled grip to set the angle.
What it fits
Porsche Cayenne 2024+ facelift, left- and right-hand drive. The base push-fits into the console slot beside the gear selector. Driving a 2018-2023 Cayenne? See the mount below.
Shipping
Leaves our Swiss workshop within 48 working hours. Free shipping from CHF 150, £150, €250 or $279.
One base. Two heads.
Same vehicle-specific base. Two heads so the mount works with the gear you already own.
MagSafe
A complete kit. Mount plus a MagSafe-compatible Qi2 wireless charger. Plug in USB-C, snap your phone on, drive.
Quad Lock®
A small plastic adapter we designed and manufacture in-house, fitting between our vehicle-specific base and your existing Quad Lock® MAG charger. You bring the Quad Lock® Wireless Charging Head and a Quad Lock® compatible case. Both sold separately by Quad Lock.
Adding a Quad Lock charger?
Fitting the Quad Lock® MAG wireless charging head to the Quad Lock variant takes five minutes. Watch the walkthrough.
Built for your Cayenne.
Made for your Cayenne
The base fits directly into the console slot beside the gear selector. Push it in and drive.
Designed in Switzerland
Engineered and manufactured in-house.
No drilling, no adhesive
No clips. No suction cups. No adhesive. No drilling.
2-year warranty
Spare parts always available.
How it works.
The base push-fits into the storage slot beside your Cayenne's gear selector. Friction holds it. Preventing scratches, eliminating rattles, keeping everything secure.
The included Qi2 charger snaps into the head. Your phone magnetically attaches, sitting at eye line next to the shifter. It stays put.
One console slot becomes your phone's permanent home.
Not sure which one? Find your fit.
| iPhone 12+ (no case or Apple MagSafe case) | MagSafe |
| Peak Design MagSafe case | MagSafe |
| Quad Lock MagSafe case (no Quad Lock charger yet) | MagSafe |
| Quad Lock MAG case + already own the charger | Quad Lock |
Fitment.
Designed for the Porsche Cayenne facelift, model year 2024 onwards. The redesigned centre console is identical across the range.
- Model years: 2024, 2025, 2026.
- All trims: Cayenne, S, E-Hybrid, S E-Hybrid, GTS, Turbo E-Hybrid.
- SUV and Coupé body styles.
- Left-hand drive and right-hand drive. Select your driving side above.
Not compatible: pre-facelift Cayenne (2018–2023) — the facelift redesigned the centre console. The Taycan, Macan, Panamera, and 911 use different interior geometries. This mount is designed exclusively for the Cayenne 2024+.
Shipping.
In stock. Ships within 48 working hours.
Warranty.
Two-year warranty. Spare parts always available.
Specifications.
MagSafe® and iPhone® are trademarks of Apple Inc. Quad Lock® is a trademark of Annex Products Pty Ltd. Peak Design® is a trademark of Peak Design Ltd. Porsche® and Cayenne® are trademarks of Dr. Ing. h.c. F. Porsche AG. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of the above companies.
Compatibility at a glance
| Vehicle or item | Fit |
|---|---|
| Cayenne 2024, 2025, 2026 (facelift), all trims, SUV and Coupé | Yes |
| Left-hand and right-hand drive | Yes, select your side |
| Pre-facelift Cayenne (2018-2023) | No, see the Cayenne 2018-2023 mount |
| Taycan, Macan, Panamera, 911 | No |
FAQ
Does it fit my Cayenne?
It fits the Cayenne facelift from model year 2024 onwards: Cayenne, S, E-Hybrid, S E-Hybrid, GTS and Turbo E-Hybrid, SUV and Coupé, left-hand or right-hand drive. It does not fit the pre-facelift Cayenne (2018-2023), because the facelift redesigned the centre console.
How does it install?
The base push-fits into the console slot beside the gear selector. No tools, no drilling, no adhesive. TPU contact surfaces keep it secure and help prevent scratches and rattles.
Which charger or head do I get?
Two options on the same base: the MagSafe kit with a MagSafe-compatible Qi2 wireless charger (up to 15 W over USB-C, iPhone 12 and newer), or a Quad Lock® adapter for your existing Quad Lock® MAG wireless charging head, sold separately by Quad Lock.
Can I adjust the angle of my phone?
Yes. The ball joint lets you tilt the phone within its range to the angle you like, and the knurled nut gives more grip when you tighten it to lock the position.
How fast does it ship, and is shipping free?
Orders leave our Swiss facility within 48 working hours. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $279 in the US.
Pairs well with
It starts as a 3D scan of your car.
Then hours and hours of modelling. Then nylon powder, fused by a laser one layer at a time, until the powder holds the shape of your console.
The rubber is the whole point.
This mount is designed with rubber around it. That rubber is what locks it in place — and what keeps it from ever marking the interior. Nothing scratches. Nothing presses into leather or Alcantara.
It is also why it goes in and comes out in seconds. No tape to peel off and no residue left behind. No suction cup to let go in the heat. No tools, no screws, nothing driven into dashboard plastics that were never made to take it.
We do the hours so the install takes seconds.
Scanning, modelling, printing, finishing and assembly happen in one building in Ticino, Switzerland. Nothing arrives finished. Nothing is rebadged. When a part needs to change, it changes that week.
swiss made
the original
Porsche Cayenne 2024+ Phone Mount
LHD (Europe / US) / MagSafe-compatible (charger included)