Iveco, Daily, 2019+ — MagSafe Uchwyt na telefon
HOLDER MAGSAFE IVECO DAILY VII
Szwajcarska precyzja. Materiały przemysłowe. Bez kompromisów.
Jest powód, dla którego największe nazwiska w branży off-road i vanów sprzedają nasze produkty, a nie kopie: bo to jest to, co robimy, i robimy to ze Szwajcarii.
PROBLEM
Jeżdżisz codziennie do pracy. Potrzebujesz telefonu widocznego, naładowanego i bezpiecznego. Zamiast tego równoważysz go na desce rozdzielczej lub walczysz z kubkiem ssącym, który poddaje się latem.
Zbudowaliśmy coś lepszego.
ROZWIĄZANIE
Przemysłowy spiek nylonowy z pierścieniem poduszki TPU. Jedno mocowanie do uchwytu na kubki słupa A zaprojektowane specjalnie dla Iveco Daily VII.
Brak kubków ssących. Brak kleju. Brak wiercenia. Brak narzędzi. Po prostu wciśnij go do uchwytu na kubki słupa A i jedź.
Zawiera ładowarkę McDodo Qi2 MagSafe. Wszystko czego potrzebujesz w jednym pudełku.
OPRACOWANE Z SKANOWANIA 3D
Uchwyt na kubki słupa A Daily'ego nie jest płaskim kołem. To złożona, w pełni zakrzywiona powierzchnia — promienie złożone, które zmieniają się wzdłuż każdej osi.
Precyzyjnie zeskanowaliśmy Iveco Daily VII 2026 roku, aby uchwycić tę geometrię do dziesiątej części milimetra. Mocowanie śledzi każdą krzywą powierzchni OEM. Dlatego siedzi idealnie, nie tupie i czuje się jak IVECO tam to umieścił.
To nie jest zaprojektowane z pomiarów. To jest zaprojektowane z danych.
JAK DZIAŁA
Uchwyt pasuje bezpośrednio do uchwytu na kubki słupa A na twoim Daily. Pierścień TPU tworzy blokadę tarcia — zapobiegając zarysowaniom, eliminując tupot, utrzymując wszystko bezpiecznie.
Dołączona ładowarka McDodo Qi2 zatrzaskuje się w mocowaniu. Twój telefon magnetycznie się przyległ. Pozostaje na miejscu nad potworami, progami hamującymi i szorstkimi stanowiskami pracy.
Instalacja zajmuje 5 sekund. Nie są wymagane żadne narzędzia.
MATERIAŁY
Nylon spiekany: Przemysłowe SLS 3D printing. Not desktop filament printing. This material survives heat, UV, impacts, commercial vehicle vibration. It doesn't warp. It doesn't crack. It doesn't fade.
Pierścień TPU: Soft enough to protect your cupholder's finish. Firm enough to eliminate movement. The interface between industrial-grade holder i vehicle interior.
Wykonane w Szwajcarii. Zaprojektowany dla kierowców, którzy spędzają cały dzień w kabinie.
HOW THIS COMPARES
We looked at every vehicle-specific phone mount currently available for the Iveco Daily.
Plastic bracket that clips into dash seams + separate phone holder. Two-piece system. No MagSafe. No wireless charging. Visible from outside the van. ~€80–110 total.
CNC dash mount. No wireless charging. Ships from Australia — long delivery times i high shipping to Europe. Visible external bracket.
Leather-look console mount. Designed for older Daily models. No MagSafe. No wireless charging.
Suction cups fail in summer heat. Vent clips block airflow i weaken slats. Adhesive pads leave residue i peel off from temperature cycling. None are designed for the Daily.
Seamlessly integrated into the A-pillar cupholder. 3D scanned from the actual Daily VII geometry. Includes Qi2 MagSafe wireless charger. SLS nylon. Swiss-made. One piece. Push-in install.
SPECIFICATIONS
Mount
Included charger — McDodo MagQ Qi2
PHONE ZGODNOŚĆ
The included Qi2 charger works with all MagSafe iPhones i Qi2-compatible Android devices.
Apple MagSafe — Compatible iPhones
- iPhone 17 / 17 Air / 17 Pro / 17 Pro Max
- iPhone 16 / 16 Plus / 16 Pro / 16 Pro Max
- iPhone 15 / 15 Plus / 15 Pro / 15 Pro Max
- iPhone 14 / 14 Plus / 14 Pro / 14 Pro Max
- iPhone 13 / 13 mini / 13 Pro / 13 Pro Max
- iPhone 12 / 12 mini / 12 Pro / 12 Pro Max
Qi2 — Compatible Android Devices
- Google Pixel 10 / 10 Pro / 10 Pro XL (native Qi2)
- Samsung Galaxy S25 / S25+ / S25 Ultra (Qi2 Ready — magnetic case required)
- Samsung Galaxy S26 series (native Qi2 expected)
- HMD Skyline (native Qi2)
This list is growing. As more manufacturers adopt Qi2, more phones will be compatible. "Qi2 Ready" phones require a magnetic case for proper alignment.
VEHICLE ZGODNOŚĆ
Designed for the Iveco Daily VII — the current generation, in production since 2019. The A-pillar cupholder geometry is identical across every model year i variant.
IVECO has updated the Daily VII several times — comfort improvements in 2022, a major safety i ADAS package in 2024 — but the dashboard i cupholder have remained unchanged. We confirmed this by 3D scanning a 2026 model.
- Model years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
- All GVW ratings: 35S, 35C, 50C, 65C, 70C
- Panel van, chassis cab, dual cab, crew cab
- Hi-Matic (automatic) i manual gearbox
- Daily 4x4
- Daily Natural Power (CNG)
- eDaily (electric)
The previous generation Daily VI (2014–2019) has a different dashboard layout i cupholder geometry. This mount does not fit the Daily VI. Quick check: if your Daily has the older two-spoke steering wheel, it's a Daily VI.
WHY CHARGER INCLUDED?
Simple: convenience.
We include the McDodo Qi2 MagSafe charger because we've tested it extensively with this mount. The dimensions work. The fit is secure. You get everything you need in one box.
No hunting for compatible chargers. No guesswork. Install i drive.
BUILT FOR COMMERCIAL USE
The Daily works hard. Your phone mount should too.
Industrial SLS nylon survives the vibration, temperature extremes, i daily abuse of commercial driving. The TPU ring protects your cupholder's finish while keeping the mount locked in place.
This isn't a consumer product adapted for commercial use. It's designed from scratch for vehicles that work.
Fleet orders? Pricing available for 10+ units. Email team@tacticengineering.com
WHY THIS EXISTS
Most phone mounts for commercial vans are either:
- Suction cup mounts that fall off in summer heat
- Adhesive mounts that damage your dash
- Cheap 3D prints that crack from vibration
We use a $50,000 industrial SLS printer. We source proper materials. We manufacture in Switzerli.
And we charge what it actually costs to make something that lasts.
IN THE BOX
- 1× Iveco Daily VII A-Pillar Cupholder Mount (with TPU ring)
- 1× McDodo Qi2 MagSafe Charger (USB-C, 100 cm cable)
- Installation instructions (hint: just push it in)
FREQUENTLY ASKED QUESTIONS
If you have a Daily VII (2019 or newer), yes — every variant, every model year. The A-pillar cupholder is identical across the entire generation. If you have a Daily VI (2014–2018), it does not fit — the dashboard is different.
The A-pillar cupholder — the one next to the driver's side A-pillar on the dashboard. Not the centre console.
No. Push it into the cupholder. Route the USB-C cable to a power source. That's it. Five seconds.
Yes — as long as your case is MagSafe or Qi2 compatible. The magnets work through cases designed for magnetic charging.
Yes. The TPU ring creates a friction lock in the cupholder, i the Qi2 magnets hold the phone securely. Tested on construction sites, cobblestones, i rough job sites. Your phone won't fall.
Yes. Any Qi2-compatible Android phone will snap on magnetically i charge wirelessly. For phones without native Qi2 (like Samsung Galaxy S25), a MagSafe-compatible case adds magnetic alignment.
ProClip is a two-piece ABS plastic system (bracket + separate holder) that clips onto the outside of your dash. No wireless charging. Our mount is a single piece that integrates into the cupholder, includes a Qi2 charger, i is made from industrial SLS nylon.
Yes. Fleet pricing available for 10+ units. Email team@tacticengineering.com with your fleet size.
The mount comes with the charger i a 100 cm USB-C cable. You'll need a USB-C PD power source (18W+ recommended for full 15W charging). Most modern vans have USB-C ports, or use a cigarette lighter USB-C adapter.
Yes. Pull it out. The TPU ring protects the cupholder surface — no scratches, no marks, no residue. Fully reversible.
szwajcarskie
wykonanie