Porsche, Taycan — MagSafe Phone Mount
PORSCHE TAYCAN MAGSAFE HOLDER
Swiss precision. Industrial materials. Zero compromises.
THE PROBLEM
Your Taycan's interior is leather, Alcantara, precision engineering. Then you clip some plastic phone mount to the air vent.
We built something better.
THE SOLUTION
60 grams of industrial-grade sintered nylon. 10 grams of TPU cushioning. One cupholder mount that belongs in your Taycan.
No clips. No suction cups. No adhesive. No drilling. Just push it into your cupholder and drive.
Includes McDodo Qi2 MagSafe charger. Everything you need in one box.
HOW IT WORKS
The holder fits directly into your Taycan's cupholder. The TPU ring creates a friction lock — preventing scratches, eliminating rattles, keeping everything secure.
The included McDodo Qi2 charger snaps into the center ring. Your phone magnetically attaches. You can rotate it toward the driver. It stays put.
One cupholder becomes your phone's permanent home.
THE MATERIALS
Sintered Nylon (60g): Industrial SLS 3D printing. Not desktop filament printing. This material survives heat, UV, impacts. It doesn't warp. It doesn't crack. It doesn't fade.
TPU Ring (10g): Soft enough to protect your cupholder's finish. Firm enough to eliminate movement. The interface between industrial-grade holder and luxury interior.
Made in Switzerland. Designed for owners who notice details.
ENGINEERED FROM A 3D SCAN
The Taycan's cupholder isn't a simple cylinder. It has compound curves, draft angles, and a tapered profile that changes along its depth.
We precision-scanned the OEM cupholder geometry down to the tenth of a millimetre. The mount follows every contour of the original surface. That's why it sits flush, doesn't rattle, and feels like Porsche put it there.
This isn't designed from measurements. It's designed from data.
HOW THIS COMPARES
We looked at every vehicle-specific phone mount currently available for the Porsche Taycan.
Two-piece plastic bracket that clips into the dash seam near the lower display + separate phone holder. Visible from outside the car. No MagSafe. No wireless charging unless you add a third piece. ~€80–110 total.
Metal bracket, good quality, US-focused. Mounts to dash or vent area. External bracket visible on the console. Limited EU availability and longer shipping. ~$70–120.
Well-made cupholder wireless charger with a clean website and good print quality. A solid option if you mostly use CarPlay and just need a charging spot. The phone sits flat in the cupholder — so no screen visibility while driving without reaching down. $159.
Taycan owners are literally printing their own mounts and sharing STL files — which tells you how bad the options are. Desktop FDM plastic. No wireless charging. No OEM finish. Creative, but not a solution worthy of the car.
Suction cups fall off. Vent clips risk damaging Taycan's precision air vents. Adhesive pads leave residue on Alcantara and leather. None are designed for this car.
Hidden inside the center console behind a lid. Overheats iPhones. Camera bump prevents proper contact on newer models. You can't see or use your phone while it charges. Most Taycan owners consider it poorly designed.
Hidden in the cupholder. Phone held upright and visible at a glance. 3D scanned from OEM geometry. Includes Qi2 MagSafe wireless charger. SLS nylon. Swiss-made. One piece. Push-in install.
VEHICLE COMPATIBILITY
Designed for the Porsche Taycan — every model, every variant, every model year since launch. The cupholder geometry is identical across the entire range.
- Model years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
- Taycan (base / RWD)
- Taycan 4S
- Taycan GTS
- Taycan Turbo
- Taycan Turbo S
- Taycan Turbo GT
- All Sport Turismo variants
- All Cross Turismo variants
- Left-hand drive and right-hand drive
The 911, Cayenne, Macan, Panamera, and 718 use different interior geometries and cupholder dimensions. This mount is designed exclusively for the Taycan. We are evaluating other Porsche models for future development — email us your model to register interest.
PHONE COMPATIBILITY
The included Qi2 charger works with all MagSafe iPhones and Qi2-compatible Android devices.
Apple MagSafe — Compatible iPhones
- iPhone 17 / 17 Air / 17 Pro / 17 Pro Max
- iPhone 16 / 16 Plus / 16 Pro / 16 Pro Max
- iPhone 15 / 15 Plus / 15 Pro / 15 Pro Max
- iPhone 14 / 14 Plus / 14 Pro / 14 Pro Max
- iPhone 13 / 13 mini / 13 Pro / 13 Pro Max
- iPhone 12 / 12 mini / 12 Pro / 12 Pro Max
Qi2 — Compatible Android Devices
- Google Pixel 10 / 10 Pro / 10 Pro XL (native Qi2)
- Samsung Galaxy S25 / S25+ / S25 Ultra (Qi2 Ready — magnetic case required)
- Samsung Galaxy S26 series (native Qi2 expected)
- HMD Skyline (native Qi2)
This list is growing. As more manufacturers adopt Qi2, more phones will be compatible. "Qi2 Ready" phones require a magnetic case for proper alignment.
⚠️ WHY WE INCLUDE THE CHARGER
The holder ring is printed to a tolerance of 0.05 mm. That's the difference between a charger that locks in place and one that doesn't.
Most third-party chargers advertise a 56 mm diameter, but in practice they range from 55.75 to 55.85 mm — a deviation 5× greater than the precision required. They won't lock. They'll rattle loose while driving, exactly when you need your phone to stay put.
The included McDodo Qi2 charger is machined to spec and precision-matched to this mount. Aluminum body with industrial rubber coating. 15W Qi2 certified. Full-speed wireless charging for iPhone MagSafe and all Qi2 devices. It locks perfectly. Every time.
We do not recommend substituting third-party chargers.
WHY THIS EXISTS
Most "Taycan accessories" are either:
- Desktop FDM prints sold for $150+
- Generic Amazon mounts that insult your interior
- Multi-piece bracket systems that look aftermarket
We use a $50,000 industrial SLS printer. We source proper materials. We manufacture in Switzerland.
And we charge what it actually costs to make something correctly.
IN THE BOX
- 1× Porsche Taycan MagSafe Cupholder Mount (with TPU ring)
- 1× McDodo Qi2 MagSafe Charger (USB-C, 100 cm cable)
- Installation instructions (hint: just push it in)
SPECIFICATIONS
Mount
Included charger — McDodo MagQ Qi2
FREQUENTLY ASKED QUESTIONS
If it's a Porsche Taycan — any model year from 2020 onwards, any variant (base, 4S, GTS, Turbo, Turbo S, Turbo GT), any body style (sedan, Sport Turismo, Cross Turismo), LHD or RHD — yes.
No. This mount is designed exclusively for the Taycan's cupholder geometry. Other Porsche models use different interior layouts. We're evaluating future models — email us your model to register interest.
Either one. Both Taycan cupholders are identical. Most owners place it in the cupholder closest to the driver for easy access.
Yes — one of the two cupholders becomes your phone mount. Most Taycan owners find this a worthwhile trade-off since the built-in phone charging solution in the center console is widely considered poorly designed.
Yes. The phone attaches upright to the MagSafe charger. You can glance at navigation, notifications, or incoming calls without reaching down. The ball joint on the charger lets you angle it toward the driver.
No. The Porsche built-in charger traps heat inside the closed center console. Our mount charges your phone in the open air with the included Qi2 charger. The MSC chip monitors temperature 1,500 times per second and throttles if needed.
Yes — as long as your case is MagSafe or Qi2 compatible. The magnets work through cases designed for magnetic charging.
Yes. Any Qi2-compatible Android phone will snap on magnetically and charge wirelessly. For phones without native Qi2 (like Samsung Galaxy S25), a MagSafe-compatible case adds magnetic alignment.
We don't recommend it. The mount ring is printed to 0.05 mm tolerance. Most third-party chargers vary in diameter by 0.15–0.25 mm — enough that they won't lock properly and will rattle while driving. The included McDodo Qi2 charger is precision-matched.
ProClip is a two-piece ABS plastic system that clips to the outside of the dashboard near the lower display. Visible. No wireless charging without additional parts. Our mount is hidden inside the cupholder, includes wireless charging, and is made from industrial SLS nylon in Switzerland.
Yes. Pull it out. The TPU ring protects the cupholder surface — no scratches, no marks, no residue. Fully reversible.
swiss
made