Tactic Engineering magnetic quick release mount for generic recovery boards, single unit showing rubber coated neodymium magnet base with stainless steel quick release pin and safety cable, green TRED recovery board in background

Hand demonstrating Tactic Engineering magnetic quick release mount installation on a green TRED recovery board, pressing the quick release pin through the board hole for tool free magnetic mounting

Close up of two Tactic Engineering magnetic quick release mounts installed on green TRED recovery board, showing the stainless steel pins inserted through board mounting holes with safety cables attached for secure magnetic vehicle mounting

Magnetic Quick Release — Generic Recovery Boards

White Ford Transit van with orange MaxTrax MK2 recovery boards magnetically mounted on the side panel using Tactic Engineering magnetic quick release supports, parked in residential driveway showing the clean exterior mounting solution

Buy it with — Add a marine-grade lock and steel cable to secure your recovery boards.

Recovery Boards Mounting Anti Theft Cable

Anti-Theft Cable — Recovery Board Mounts

60 cm

CHF 22.00

Magnetic Quick Release — Generic Recovery Boards

CHF 239.00

Taxes included. Shipping calculated at checkout.

Number of magnetic mounts

In stock, ready to ship.Order before 11:00 CET: ships in 2 working days. Otherwise 3.

★ 5.0 · 11 reviewsShips from 🇨🇭 SwitzerlandSwiss VAT included2-year warranty

✓Complete your kit · save up to 15%

Trusted by the industry

Compatibility Check

Will it work on your vehicle?

Our magnetic mounts bond directly to steel body panels. Select your vehicle below to check compatibility instantly.

01 Vehicle type

Not sure?

The 10-second magnet test

Grab any magnet from your fridge, kitchen, or toolbox.

Place it on the body panel where you'd mount the product — roof, side panel, or rear door.

If it sticks firmly, you're good. Our 55 kg-force magnets will hold with no issues. If it slides or barely holds, your panel may be aluminum or composite — contact us and we'll find a solution.

Magnetic Quick Release — Generic Recovery Boards

Magnetic quick-release mounts for any standard recovery board. No rack. No drilling. No glue. Tool-free installation in under a minute.

Made in SwitzerlandMost standard recovery boards56 kg pull per magnetShips in 48 working hours

How it works

The magnets hold against the steel body of your vehicle. The quick-release pins pass through the board and lock it to the mounts. When you need the boards, pull the pins and they come off in your hands.

No rack. No drilling. No glue. Tactic Engineering designed the first magnetic mounts for camper vans, in December 2021. Every part is designed and manufactured in Switzerland, hand-assembled in-house.

Will it hold on your vehicle?

The rule: the magnet needs steel underneath. Our mounts bond directly to steel body panels, so they work on any vehicle that is not built from aluminium.

Holds

Steel body panels — this is most vehicles

Does not hold

Aluminium bodies — Land Rover Aluminium bodies — new Ford Bronco

Not sure about your vehicle?

Select your make and model in the compatibility check.

What's in the kit

Each board needs two magnetic mounts. Pick the kit that matches the number of boards you carry.

4-mount kit — carries 2 boards

4 rubber-coated neodymium magnets (90 mm Ø). 4 quick-release pins in carbon-fibre reinforced plastic. 4 transparent paint-protection stickers.

Kit

8-mount kit — carries 4 boards

8 rubber-coated neodymium magnets (90 mm Ø). 8 quick-release pins in carbon-fibre reinforced plastic. 8 transparent paint-protection stickers.

The transparent stickers sit between magnet and panel to keep the paintwork free of scratches. Compatible with most standard recovery boards on the market.

Anti-theft cable with marine-grade lock

Available separately — get it here.

Using MaxTrax or TRED boards?

We make dedicated mounts with an exact fit for specific brands. If you know your board model, take the right one:

MaxTrax MK2 / LITE / XTREME — quick-release magnetic mounts designed specifically for MaxTrax recovery boards.
TRED GT / HD / PRO — dedicated magnetic mounts for ARB / TRED recovery boards.

Designed, produced and hand-assembled in Switzerland

The plastic part of the pins is printed in carbon-fibre reinforced composite — one of the most expensive materials we can buy. It makes the pins durable and resistant to heat and impact.

Fabrication method. Our products are made with advanced 3D printing and the highest quality materials available. That method leaves minor marks: visible layers, slight waviness. We separate anything with a noticeable defect and ship only what meets our standard. These are not injection-moulded pieces.

Does 3D printing change anything for you? Not really. You may see very thin layers in the plastic. It is far less pronounced than on the common 3D prints you see elsewhere, because this composite is printed at 270 °C — it withstands extremely high temperatures before it deforms.

How it compares

Option

Drilled bracket

Decades-old generic design. Often made in Asia. No pull strength to quote. Typically one year of warranty.

Option

Magnetic look-alike

A recent copy of our design. Often made in Asia. Pull strength usually unspecified. New to the market.

This mount

Tactic Engineering

Original design, December 2021. Designed and manufactured in Switzerland. 56 kg per magnet, tested. Thousands of vans worldwide since 2021. Two years of warranty, worldwide.

Specifications

MagnetsRubber-coated neodymium, 90 mm diameter

Hold force56 kg per magnet

Pin materialCarbon fibre reinforced plastic, 3D printed at 270 °C

CompatibilityMost standard recovery boards on the market

Mounts per board2

InstallationMagnetic — no tools, no drilling, no glue

OriginDesigned, produced and hand-assembled in Switzerland

DispatchShips in 48 working hours

From the wild

Reel by @tactic_vans on Instagram

The original. Invented here.

Tactic Engineering invented the magnetic vehicle mount. Designed and prototyped in Switzerland, stress-tested on the road, first units shipped in December 2021. Every magnetic mount on the market today came after ours.

The biggest names in the van and off-road industry sell our product, not the copies that showed up four years later. Because this is what we do, and we do it from Switzerland.

Sold worldwide through

Burkhart Engineering Germany Hobus Belgium Dutch Van Parts Netherlands Montpellier 4x4 France Van Creed Australia Nirvana Outfitters Canada

Shipping, duties and warranty

DispatchWithin 48 working hours from our Swiss facility

SwitzerlandSwiss VAT included in the displayed price

European UnionEU VAT and duties included — nothing to pay on delivery

Other countriesDisplayed price excludes local taxes, collected by the carrier or customs at delivery

Warranty2 years, worldwide.

Spare partsEvery part replaceable at fair prices, in or out of warranty — from a screw to a small plastic piece. You never re-buy the kit.

UpgradesReplace worn pieces or move to our latest release without buying a whole new kit

Legal disclaimer: According to the Swiss regulatory authority, the magnetic supports are classified under cargo securing equipment, for which the driver assumes responsibility. Tactic Engineering cannot be held accountable for any incidents resulting from the use of our products. It is the user's responsibility to ensure compliance with local regulations and laws regarding cargo securing. Please use the magnetic supports responsibly and exercise caution.

MAXTRAX®, TRED®, ARB®, Land Rover® and Ford Bronco® are trademarks of their respective owners. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of them.

swiss