Magnetic Quick Release Generic Recovery Boards (Curved Surfaces)

Magnetic Quick Release Generic Recovery Boards (Curved Surfaces)

CHF 309.00

Taxes included. Shipping calculated at checkout.

Kit

Only 1 left in stock

In stock, ready to ship.Order before 11:00 CET: ships in 2 working days. Otherwise 3.

★ 4.9 · 266 store reviewsShips from 🇨🇭 SwitzerlandSwiss VAT included2-year warranty

✓Complete your kit · save up to 15%

Trusted by the industry

Magnetic Quick Release — Generic Recovery Boards (Curved Surfaces)

Magnetic quick-release mounts for any standard recovery board, engineered for curved panels. Fenders, wheel arches, cab and door curvature, swingouts. No rack. No drilling. No glue.

Designed in SwitzerlandAdjustable joints for curved panels56 kg pull per magnetShips in 48 working hours

How it works on curved panels

Each magnet sits on an articulating joint that pivots to match the curvature of the panel. The result is full magnet-to-panel contact on fenders, wheel arches, cab and door curvature, and swingouts. Quick-release pins lock the boards in. Pull the pins and the boards come off in seconds.

Tactic Engineering designed the first magnetic mounts for camper vans, in December 2021. Every part is designed and manufactured in Switzerland — including this curved-surface variant with adjustable joints.

Where it holds

The rule: the magnet needs ferromagnetic steel underneath. Curved or flat makes no difference to this version — the joint takes care of the geometry.

Holds

Fenders and wheel arches Cab and door curvature Swingouts Flat steel panels

Does not hold

Aluminium bodies — Land Rover, Range Rover Aluminium bodies — new Ford Bronco

Not sure about your vehicle?

Run the compatibility check for your make and model.

Pick your curved-surface kit

Each board needs two magnetic mounts with adjustable joints. Pick the kit that matches the number of boards you carry on fenders, wheel arches, cab curvature or swingouts.

4-mount kit — carries 2 boards

4 rubber-coated neodymium magnets (90 mm Ø) with adjustable joints. 4 quick-release pins in carbon-fibre reinforced plastic. 4 transparent paint-protection stickers sized for curved panels.

Kit

8-mount kit — carries 4 boards

8 rubber-coated neodymium magnets (90 mm Ø) with adjustable joints. 8 quick-release pins in carbon-fibre reinforced plastic. 8 transparent paint-protection stickers sized for curved panels.

Compatible with most standard recovery boards on the market.

Using MaxTrax or TRED boards?

We make dedicated curved-surface mounts for those brands:

How it compares

Option

Drilled bracket

Flat backing plate only. Often made in Asia. No pull strength to quote. Typically one year of warranty.

Option

Magnetic look-alike

Flat base — gaps on curves. Often made in Asia. Pull strength usually unspecified.

This mount

Tactic Engineering

Adjustable joints for full contact on fenders, arches and swingouts. Designed and manufactured in Switzerland. 56 kg per magnet, contact maintained on curves. Two years of warranty.

Questions we get about curves

Will these work on my van's fenders, wheel arches or cab curvature? Yes. That is what this variant is built for. The adjustable joint behind each magnet pivots to conform to the panel. On ferromagnetic steel you get full magnet-to-panel contact and the full 56 kg pull per magnet.
What if my surface is part curved, part flat? The joint flexes when it needs to and sits flush when the panel is flat, so one kit handles mixed geometry on the same vehicle.
How tight a curve can it handle? It is designed for the radii you meet on van and 4x4 fenders, wheel arches, hoods, swingouts and door curvature.
Will it work on my vehicle? It works on any ferromagnetic steel panel, flat or curved. It will not work on aluminium bodies — Land Rover, Range Rover, new Ford Bronco. Run the compatibility check if you are unsure.

Specifications

MagnetsRubber-coated neodymium, 90 mm diameter, on adjustable joint

Hold force56 kg pull per magnet

Lateral force~17 kg per magnet on a curved steel panel

Pin materialCarbon fibre reinforced plastic, 3D printed at 270 °C

JointArticulating — conforms to fenders, wheel arches, cab and door curvature, swingouts

CompatibilityMost standard recovery boards

Surface fitCurved and uneven steel panels; also works on flat

InstallationMagnetic — no tools, no drilling, no glue

4-mount kitSupports 2 boards

8-mount kitSupports 4 boards

OriginDesigned in Switzerland, hand-assembled in-house

The original. Invented here.

We invented magnetic mounts for recovery boards — flat and curved. Long before the copycats arrived we were already selling magnetic recovery board supports to overlanders worldwide.

The biggest names in the van and off-road industry sell our product, not the copies that showed up four years later. Because this is what we do, and we do it from Switzerland — including the curved-panel version you are looking at now.

Sold worldwide through

Burkhart Engineering Germany Hobus Belgium Dutch Van Parts Netherlands Montpellier 4x4 France Van Creed Australia Nirvana Outfitters Canada

Shipping, duties and warranty

DispatchWithin 48 working hours from our Swiss facility

Switzerland and EUVAT included in the displayed price — nothing extra to pay on delivery

Other countriesLocal taxes collected by the carrier or customs at delivery

Warranty2 years on every Tactic Engineering product

Spare partsEvery individual part replaceable at fair prices — adjustable joints included. You never re-buy the kit.

Broken? Out of warranty?

Every part is available separately at fair prices.

Legal disclaimer: Sold from Switzerland, where cargo carriers of this type do not require special authorization. Responsibility lies with the driver. Tactic Engineering cannot be held accountable for any incidents resulting from the use of our products. Verify full magnet-to-panel contact on curved surfaces before driving.

MAXTRAX®, TRED®, Land Rover®, Range Rover® and Ford Bronco® are trademarks of their respective owners. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of them.

swiss