INEOS Grenadier Phone Mount
Second mount CHF 49.00 instead of CHF 69.00. Applied in the cart.
Buy it with — Carry skis, boards, or kites. Magnetic, no roof rack needed.
Details that make the difference
Ball joint
Knurled grip
Tilt the phone within its range to the angle you like.
The knurled nut gives more grip when you tighten it to lock the position.
Trusted by the industry
Want one on both sides? Order both LHD and RHD. LHD fits the left side of the dash (driver on US/EU vans, passenger on UK/AU). RHD fits the right side. 35% off the second one, applied automatically in the cart.
INEOS Grenadier Phone Mount
Bolts to the dashboard on four existing factory screw points, between the seat heating and fan knobs. No drilling. No adhesive. Nothing new gets cut into the dash.
At a glance
Use it for
Keep your phone in view in the Grenadier, charging over Qi2.2 MagSafe up to 25 W, with a ball joint and knurled grip to set the angle.
What it fits
All INEOS Grenadier models, LHD and RHD (select at checkout). Bolts to four existing factory screw points between the seat heating and fan knobs, longer screws included.
Shipping
Leaves our Swiss workshop every Tuesday and Friday. Free shipping from CHF 150, £150, €250 or $299.
One base. Three heads.
The base bolts to the Grenadier dashboard. On top, pick the head that matches the gear you already own.
MagSafe
A complete kit. Mount plus a MagSafe-compatible Qi2.2 wireless charger, up to 25 W over USB-C. Snap the phone on, drive. iPhone 12 and newer, Apple MagSafe cases, Peak Design cases and Quad Lock cases, up to 3 mm thick.
Quad Lock®
A sintered-nylon adapter we design and manufacture in-house, fitting between our base and your existing Quad Lock® MAG wireless charging head. You bring the Quad Lock® head and case, both sold separately by Quad Lock.
1-inch Ball — RAM compatible
The mount finished with a 25.4 mm ball in sintered nylon, fused directly to the mount body. Takes any RAM Mounts® arm or third-party 1-inch ball socket. You bring the arm and the cradle, sold separately by RAM Mounts.
iPhone 12+ bare or in an Apple MagSafe case — MagSafe. Peak Design MagSafe case — MagSafe. Quad Lock MagSafe case but no Quad Lock charger yet — MagSafe. Quad Lock MAG case and you already own the charging head — Quad Lock. Already running a RAM Mounts arm and cradle — 1-inch Ball.
Five minutes. Watch the walkthrough on YouTube.
Fitment. Read this before ordering.
The rule: four factory screws sit between the seat heating and fan control knobs on the dashboard. Remove them. Use the longer screws supplied in the kit to secure the mount bracket in their place. Nothing else changes. No adhesive, no suction cups, no clips, no modification.
Fits
Drive side is a variant choice. Select it at checkout.
Built for the car
Factory screw points only
Four screws already in the dash do the work. Longer screws are in the box. Take the mount off and the dashboard is as INEOS built it.
Tiltable
Set your viewing angle once and forget about it.
Magnetic Qi2 alignment
The phone snaps on and stays put on tarmac, on gravel, and everything in between.
Designed and made in Switzerland
Sintered nylon and stainless steel hardware, manufactured in-house. Spare parts always available.
Specifications
Mount
MagSafe variant — Grenadier base with Qi2 charger
Included Qi2 charger
Quad Lock® variant — adapter only
1-inch Ball variant — RAM compatible
MagSafe® and iPhone® are trademarks of Apple Inc. Quad Lock® is a trademark of Annex Products Pty Ltd. Peak Design® is a trademark of Peak Design Ltd. RAM Mounts® and X-Grip® are trademarks of National Products Inc. INEOS® and Grenadier® are trademarks of INEOS Automotive. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of the above companies.
Compatibility at a glance
| Vehicle or item | Fit |
|---|---|
| All INEOS Grenadier models, LHD (Europe / US) | Yes |
| All INEOS Grenadier models, RHD (UK / Ireland / Japan) | Yes, select RHD |
FAQ
How does it attach to the Grenadier?
Four factory screws sit between the seat heating and fan control knobs. Remove them and use the longer screws supplied in the kit to secure the mount bracket in their place. No adhesive, no drilling, and the dashboard is as INEOS built it when you take it off.
Which charger or head do I get?
Three heads on the same base: the MagSafe kit with a MagSafe-compatible Qi2.2 wireless charger (up to 25 W over USB-C, iPhone 12 and newer), a Quad Lock® adapter for your existing Quad Lock® MAG head (sold separately by Quad Lock), or a RAM® 1-inch ball (25.4 mm) for RAM® arms and cradles.
Can I adjust the angle of my phone?
Yes. The ball joint lets you tilt the phone within its range to the angle you like, and the knurled nut gives more grip when you tighten it to lock the position.
Will it rattle or scratch my console?
No. A black rubber strip absorbs vibration, holds the base firmly in place without adhesive tape and stops plastic rubbing on plastic, so your interior stays as it left the factory.
How fast does it ship, and is shipping free?
Orders leave our Swiss facility every Tuesday and Friday. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.
Quick questions
Which phones work with the MagSafe head?
iPhone 12 and newer, or any Android phone with a MagSafe-compatible case up to 3 mm.
Pairs well with
It starts as a 3D scan of your car.
Then hours and hours of modelling. Then nylon powder, fused by a laser one layer at a time, until the powder holds the shape of your console.
We do the hours so the install takes seconds.
Scanning, modelling, printing, finishing and assembly happen in one building in Ticino, Switzerland. Nothing arrives finished. Nothing is rebadged. When a part needs to change, it changes that week.
swiss made
the original
